Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Fiting a shower waste without a trap in the USA area at PlumbersForums.net

Messages
10
Hi All
I am creating an ensuite bathroom abd have to fit a macerator(i know i Know) the instructions require the shower waste be fitted without a trap (i assume it is for the flow rate of rh waste water) Any ideas on where to find this. I have been lookong at Mcalpine fast flow traps, would this be sufficent.

Thanks in advance
 

Reply to Fiting a shower waste without a trap in the USA area at PlumbersForums.net

Similar plumbing topics

Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could...
Replies
0
Views
265
Hi all, I'm installing a concrete patio out back. By the wall under the kitchen sink I have an existing P-Trap gully for the grey water from the...
Replies
0
Views
176
Hi All, I am looking to take my bath out and fit a shower. Regards to tanking. Is it ok to just seal everything with plastic rather than just...
Replies
3
Views
267
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Replies
1
Views
263
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
217
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock