Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Flowmax Fm4651 v Flowmax 4734

Post new thread
  • Thread starter Steven Sluman
  • Start date
  • Replies 1
  • Views 2K

Discuss Flowmax Fm4651 v Flowmax 4734 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
S

Steven Sluman

Hi does anyone know the difference between a Flowmax Fm4651 140ltr and a Flowmax Fm4734 140ltr combination cylinder and are they interchangeable or where I can check info
 
The Flowmax was originally made be "Range" cylinders of Wakefield , they were bought out by Kingspan a few years ago . The new flowmax's serial no's do not match yours , so they might be off a previous model , one major difference on the Flowmax ( sorry I dont know if this helps ) is some had manual fill and some were auto-fill . To help me why do you need to know ?
 
Status
Not open for further replies.

Reply to Flowmax Fm4651 v Flowmax 4734 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
209
Lou
Lou
T
Trying to source a dual-flush valve
Does anyone know where I can get one of these? Toilet is leaking into the bowl. This one pushes in with a half turn but I can't find one anywhere.
Replies
2
Views
230
Thomas J Marshall
T
J
Leak detection company
Does anyone know a good, not super expensive, leak detection company in the London area?
Replies
0
Views
320
John-sjw
J
D
Pop quiz, does anyone recognise this radiator valve?
Hi Does anyone recognise the make/brand of the radiator valve. It leaks when closed and Iam hoping I can replace a seal etc?
Replies
4
Views
233
turnpin
turnpin
B
What is correct toilet supply line
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic...
Replies
2
Views
229
ShaunCorbs
ShaunCorbs

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock