Discuss Fuses in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

jaydebruyne

Plumbers Arms member
Plumber
Gas Engineer
Messages
2,718
Is an F2 fuse just a 2 amp glass quick blow fuse? And an F1 the same but 1 amp?
 
Have answered my own question, ignore post
 
Status
Not open for further replies.

Reply to Fuses in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, My boiler, which is 3 years old, has stopped working and it turns out it was the fuse. I had an engineer resolve the issue, but when I turned...
Replies
6
Views
881
  • Locked
Hi all We have a Vaillant turbomax plus 828e combi which we found powered off a few days ago. Turns out the 2a glass fuse on the PCB had gone...
Replies
1
Views
386
Hi can anybody help me with a problem I am having. following a power cut the heating and hot water failed. The boiler would light but it would go...
Replies
7
Views
605
Ferroli optimax 25 OV Pcb blew after turning on after pump replacement. Nothing on display blank.power on board ok. Fuse not blown? Hence Could...
Replies
1
Views
529
Deleted member 120897
D
My boiler is currently powered by a switched fused spur. The spur is located 40cm underneath the boiler. I haven't checked but it is probably a 3A...
Replies
2
Views
985

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock