Gas Burner Pressure Tolerances

Post new thread

Discuss Gas Burner Pressure Tolerances in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
R

richard978

Gas Engineer
Messages
168
Mental block, can't remember the tolerances for burner pressures......I was sure it was no more than 5% over and 10% under.....can anyone remember.


Boiler instructions don't specify.
 
Status
Not open for further replies.

Reply to Gas Burner Pressure Tolerances in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

G
Is my gas burner an FSD problem or a thermocouple problem?
I am troubleshooting a gas hob where one burner is reluctant to light. When it is lit and I blow the flame out the FSD on that burner cuts off...
Replies
2
Views
374
Gary M
G
M
Gas pressure drop with flow to a larger pipe from a smaller one?
Hi, Non-professional / knowledgeable person here. I'm a Brit in Romania who volunteers for a charity building an old peoples home for needy old...
Replies
3
Views
441
ShaunCorbs
ShaunCorbs
Jagobezzer
HETAS - Without a pressure pump
Hi all, Just a quick question. I have a log burner and a gas boiler on a dual fuel system (Central heating and Hot Water) either can do both. The...
Replies
0
Views
370
Jagobezzer
Jagobezzer
P
Working gas pressure on Vaillant ecotec 630
British Gas servicing the above boiler ramped up the boiler to maximum in the installer menu to do flue gas analysis. They also measured the...
Replies
4
Views
605
PeterCylus
P
Sarah_Homeowner
How do I Increase Pressure in my boiler??
Hi, I am trying to increase the pressure in my gas boiler and was under the assumption it just involved opening these two small black valves. I...
Replies
0
Views
378
Sarah_Homeowner
Sarah_Homeowner

Newest Plumbing Threads

Back
Top