Discuss gas meter bracket in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

ambrosia

Plumbers Arms member
Plumber
Gas Engineer
Messages
892
does anyone know what the pieces of lead on the gas meter bracket which hold the meter unions in place are called and where to get them

I have a customer who wants a smart meter installed, however when the guy from Evo came he refused to touch her current meter and install the new one as these were missing.
All pretty pathetic but i said i would try and help her out
 
and shear bolt dont forget
 
thanks guys

whos part number is that, my next question is where do i get them
 
It don't matter how bad the current meter install is the meter fitter has to bring it up to standard. I would assume the fitter took and look and didn't want to change it because it was a hard job, some fitters can't solder very well so try and get out of changes that require pipe work alterations.

Remember the meter and bracket belong to the energy company.
 
Last edited:
So does that mean that I have to call the energy company to fit a bracket to the meter I encountered today?
It's sitting on the floor in the meter cupboard just inside the front door. Continuity and anaconda OK - just no bracket or security ties present.
It don't matter how bad the current meter install is the meter fitter has to bring it up to standard. I would assume the fitter took and look and didn't want to change it because it was a hard job, some fitters can't solder very well so try and get out of changes that require pipe work alterations.

Remember the meter and bracket belong to the energy company.
 
So does that mean that I have to call the energy company to fit a bracket to the meter I encountered today?
It's sitting on the floor in the meter cupboard just inside the front door. Continuity and anaconda OK - just no bracket or security ties present.

I would say yes
 
So does that mean that I have to call the energy company to fit a bracket to the meter I encountered today?
It's sitting on the floor in the meter cupboard just inside the front door. Continuity and anaconda OK - just no bracket or security ties present.

Not unless its AR.
 
Status
Not open for further replies.

Reply to gas meter bracket in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
555
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer...
Replies
2
Views
179
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I...
Replies
8
Views
394
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the...
Replies
5
Views
324
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
219

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock