Discuss Heatline vizo 24, Help!! Pressure too high in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
S

Shazzehhh

The boiler was working fine until recently the pressure gauge shoots up to 4Bar (max) within 15 seconds of switching on the boiler and water starts leaking from the back of the boiler, I bled the radiators and the pressure dropped down to 0.2 and crept up very very slowly to 2.5. My initial thoughts are that the valve releasing the gas in to the boiler must be leaking, however since I am no expert in these matters I thought I would ask.

Pushing it a bit here, how much do you reckon the cost would be? In my previous flat I had a boiler problem and 4 plumbers told me different things and the whole unit had to be replaced so I am asking here first to know what I am looking for and what I should expect the plumber to look at.

Thank You
 
Two things for you

1. you need to be registered

2. you need a gas safe engineer
 
Status
Not open for further replies.

Reply to Heatline vizo 24, Help!! Pressure too high in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock