Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Help! Tap Valve Removal in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Messages
1
DB5CE890-89D8-47EB-82E7-DD00B13C9DCD.jpeg
D05FEDFD-A882-45E3-84E4-E3AFCBD8836A.jpeg

Hi All, I have this monobloc basin mixer tap in my bathroom. It was installed 11 years ago, but the hot valve has started to drip from the top around the tap head. Problem is I don’t know how to get to the valve. There are no grub screws visible and I’ve tried to remove the valve cover but it won’t turn. Any ideas? Thanks.
 

Reply to Help! Tap Valve Removal in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't...
Replies
12
Views
413
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Replies
1
Views
249
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for...
Replies
1
Views
293
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Replies
0
Views
227
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason...
Replies
3
Views
321
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock