Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Help with Rio Mixer Shower Head Removal in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
1
Im trying to service the Cartridge on my Bristan Rio Mixer, and I’m stuck! The instructions from Bristan don’t make sense when compared to the unit.

I’ve taken off the tap head part from the thermostat control. I can’t find any grub screw under any where to expose the Cartridge. Might it be that it’s pushed
On to the
Head part of the cartridge and has just stuck with lime?

I can provide pics if necessary but can’t work out how to upload them!

Please help!
 
Status
Not open for further replies.

Reply to Help with Rio Mixer Shower Head Removal in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

This is driving me bonkers! I have a Jaquar shower mixer unit - which has started to leak from the diverter cartridge. I think it's an early...
Replies
8
Views
396
S
Hi, hope all is well! I’ve fitted a compression cap on two of my shower mixer copper pipes (15mm). One of them has scratches and burring and is...
Replies
1
Views
407
Hi, I was hoping someone might be able to help with this. The tap is a Bristan RS BAS C, the hot tap has been leaking and I've trying to get the...
Replies
9
Views
415
Hi All Just looking for some advice on which Exposed Thermostatic Mixer Shower (Bar Shower) would go well with the Shower Pump i'm getting...
Replies
4
Views
629
A
Hey, here goes and I hope it works.. never used one of these before! I have a Sagittarius Ergo mixer shower min bar of pressure required 1 bar...
Replies
1
Views
439
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock