Might be of interest, - note post #7 in the thread below
My (not researched thoroughly so read the above) understanding is that you wire the Hive L and N to the boiler supply L and N, and then the Hive programming outputs supply mains L (eg from terminal 4 to CHr etc.)
Hive installation on a Potterton Powermax HE (split off another thread)
'Hive installation on a Potterton Powermax HE' I have the same boiler and looking to install Hive. Do you have to extend the wiring to be able to mount the receiver somewhere? Thanks, A
www.diynot.com
My (not researched thoroughly so read the above) understanding is that you wire the Hive L and N to the boiler supply L and N, and then the Hive programming outputs supply mains L (eg from terminal 4 to CHr etc.)
Last edited: