J
Jalisco
I don't live near a city and need to figure out how many rods of 56% I need to solder 3" copper to copper and come copper to stainless steel. I thank you for your time.
Discuss How many 3" copper fitting can you do with 1 rod of 56% silver solder in the Plumbing Tools area at PlumbersForums.net
- Messages
- 34,374
- Solutions
- 2
Normally the same dia is used in solder so 3” per joint so 6” for a coupling / elbow 9” for a tee etc
Reply to How many 3" copper fitting can you do with 1 rod of 56% silver solder in the Plumbing Tools area at PlumbersForums.net
Similar plumbing topics
Hi,
Short version: I have about 4" of pipe sticking out of a concrete floor in a cupboard. It makes a 45-degree bend as it exists (bent, not with...
Hi,
Hoping some of you folks can steer me in the right direction. I have been self employed for the last 15years supplying services to the...
Hi
Can anyone advise how the copper push fit connectors work?
Is it a matter of just pushing in the pipe until it goes in as far as it can and...
My living room smells like a sewer but I can't tell where it is coming from. Not sure where to start looking. The saniflo discharge pipe runs...
Hi,
I am trying to fit a replacement tap to a mini-sink that's built in to the top of a toilet. The original tap isn't made any more by the...
Newest Plumbing Threads
-
How much would you pay for a universal flush valve that enables replacements in under 5 minutes?
- Started by Professor
- Replies: 8
-
Bossing shower waste into soil pipe vs. separate shower waste- Started by CitizenErased
- Replies: 3
-
UK Advice on waste water pump in first floor flat
- Started by kbqwert
- Replies: 3
-
AM18x1 femail to 1/2" hose connector.
- Started by Adaminspace
- Replies: 0
-
Off grid shower and toilet solution needed
- Started by TpXThinnr
- Replies: 5
-
Expansion vessel size unvented hot water
- Started by Matt0029
- Replies: 2
-
Acrylic bath manufacturing standards/dimensions
- Started by Michelle
- Replies: 2