HOW to fix that ......

[Old Account]

hi lads,

Does anyone have not idea how to fix that leak? Any chance of getting a new part or something?
The leak is coming from where the blue towel is.

Below you will see picture

KIND regards,

Ron

 

[ShaunCorbs]

What's with the ar / id label Ron ?

 

[Old Account]

What's with the ar / id label Ron ?

GOOD question,
I haven’t seen the job yet just received pictures today. I have asked her why she hasn’t replaced the boiler yet. She had an offer of British Gas for over 4K ...
Basically, she wanted it temporarily fixed. Shall I not touch it ?

 

[ShaunCorbs]

It's a gas boiler ron are you gas safe ?

 

[Chalked]

Flow switch will need replacing. It’s an “o” ring seal and will need the brass face cleaning back up, before reassembly.
No need to be gsr for that bit.

 

[quality]

They all leak like this there is an estate near me that has them fitted. whats the best storage combi to replace these (sorry for the thread hijack)

 

[ShaunCorbs]

They all leak like this there is an estate near me that has them fitted. whats the best storage combi to replace these (sorry for the thread hijack)

viessmann 222

 

[ShaunCorbs]

Flow switch will need replacing. It’s an “o” ring seal and will need the brass face cleaning back up, before reassembly.
No need to be gsr for that bit.

true but the ar / id label and the appliance isolated needs looking at which requires you to be gas safe

(second pic right bottom)

 

[quality]

viessmann 222

Whats the height of the 222?

 

[ShaunCorbs]

just a bit bigger than the max (100mm ish)

 

[townfanjon]

Easy switch swap if you do it , SIKA switch I think .
Tighten up with a “ strong hand “ not grips . The big tip is the flow switch has a small arrow on it , make sure you dont get it upside down or the fun will start .

 

[SimonG]

Sika flow switch as tfj said above.

 

[Old Account]

Flow switch will need replacing. It’s an “o” ring seal and will need the brass face cleaning back up, before reassembly.
No need to be gsr for that bit.

Thanks a lot chalked. Do you know where to get a new one or would you just replace the o ring and clean the rest up ?

 

[Old Account]

They all leak like this there is an estate near me that has them fitted. whats the best storage combi to replace these (sorry for the thread hijack)

I am interested as well, good question. Have you changed the part before ? If so where do I get a new one?

 

[Old Account]

true but the ar / id label and the appliance isolated needs looking at which requires you to be gas safe

(second pic right bottom)

Customer has stated that British Gas has put it there years ago due to the fluid pipe ... whatever that’s means ... I did not understand what she meant by this.