I have old bathrooms. Two taps - one for cold, one for hot. No mixer taps. I have a Saxon Copperflow Truflow 140L hot water system. Both hot water taps couldn’t go on blink at same time. Do you think its my hot water system?
Discuss I have hot water everywhere but my showers. I have 2 bathrooms. Hot H2O fine everywhere else. Hot starts in showers but only lasts about 2 minutes. in the USA area at PlumbersForums.net
- Messages
- 34,369
- Solutions
- 2
Unlikely to be the system if the rest of the taps are getting hot
Reply to I have hot water everywhere but my showers. I have 2 bathrooms. Hot H2O fine everywhere else. Hot starts in showers but only lasts about 2 minutes. in the USA area at PlumbersForums.net
Similar plumbing topics
I have a Combi boiler and, a few minutes ago I turned on the hot tap in the kitchen and the water was far from hot. In fact, it was decidedly...
We have a gravity fed hot water system in our the house we have just recently moved into. It works fine with the downstairs shower, however we are...
Hi all, I have an issue with our shower's hot water. The shower is operated using two separate taps for cold and hot water. When the hot water tap...
Hello, and thanks for taking the time to read.
I'm trying to work out if the idea I have is practical?
The water pressure in my newly renovated...
Hi all,
can someone get to the bottom of this before I call a plumber, en suite shower started leaking from the mixer bar so took the shower off...