Search the forum,

Discuss I think we need a" Dislike" button in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
T

Toxic Ted

As the title says.....or do you think it will be abused?
 
I think it would get abused and cause more arguments on the open forums. Some times I'd like a "jog on" button but that seems unlikely too!
 
'dislike', 'jog on', 'you're having a laugh', 'foxtrot oscar' erc etc etc. If we had all the buttons we need we'd never get anything posted.
 
Your avin a giraffe

Negativity often only creates conflict .

So best Button it , or not !

( Arguments are often used as a distraction tactic )

We have some negative emotes - Maybe suggest a combination ? :90:
 
Yes just use a emoticon, but remember this is a friendly forum and not to cause offence.

SO BOG OFF.:rockon2:
 
It would definitely get abused
 
Last edited by a moderator:
As the title says.....or do you think it will be abused?
It would get abused. People would find it hilarious to see how fast they could get someone down to -1,000 and give the impression to those not in on the joke that said victim was an idiot - even if that person happened to be the most helpful when it came to giving advice.
 
Status
Not open for further replies.

Reply to I think we need a" Dislike" button in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Show us your fanciest radiators you've installed! We would love to see them! I love this Milano vertical radiator in the kitchen space. What do you think?
Replies
4
Views
232
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
280
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
220
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
170
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
216
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock