Ideal Logic+ 30 Combi Fault

[Mitchellb1]

Basically, the boiler this morning wouldn't fire up so went to check it and was the pressure was 0, so topped it up normally to about 1.5 which has worked before, but it is still giving the fault:

1) top pressure up to 1.0, 2) bleed radiators, 3) call installers

I've had a local plumber out who tried to reset it and get it to fire, but didn't have any joy - he thinks maybe it could be a sensor not recognising the pressure is high enough? Called Ideal who's soonest response time was Friday, so hoping someone could point me in the right direction to get it fixed sooner

Thanks

 

[ShaunCorbs]

Have you tried turning the power off and leaving it 5 mins then back on ?

 

[Mitchellb1]

Yeah left it off for about 10 minutes earlier today and didnt do anything when put the power back on

 

[ShaunCorbs]

try topping the pressure upto 1.5 bar

 

[townfanjon]

Try resetting again but just go to reset and back , don't hold it over for long

 

[Mitchellb1]

Thanks, topped it up and its about 1.7 now, and did another reset but it still sits on the fault - it sounds like it's trying to fire up and the fan goes

 

[ShaunCorbs]

Gas safe engy needed or idea sorry to say

 

[Scott_D]

Heating and hot water not working?
Have you got gas at another appliance?

 

[Mitchellb1]

Yep no heating / hot water, got a gas fire that is still working

 

[king of pipes]

The Ignition units can play up on these a good warranty on the Logic + so should be a free fix providing the servicing is up to date. Cheers kop