Discuss Incoming mains 3bar flow rate 16litre permin in the Plumbing Jobs | The Job-board area at PlumbersForums.net

3 bar at 16 litres per min is very good. When did you test this ?
I would be careful ...in high summer or peak morning times it may well be less. What times did you sample ? Where about s are you .we will all move nearby eg ..London the water crawls out if the pipe and tastes uck and still has female contraceptive pill residue in it
Rob Foster aka centralheatking
 
Storage combi at min something like a Viessmann 111 or 222 best option is an unvented cylinder
 
3 bar at 16 litres per min is very good. When did you test this ?
I would be careful ...in high summer or peak morning times it may well be less. What times did you sample ? Where about s are you .we will all move nearby eg ..London the water crawls out if the pipe and tastes uck and still has female contraceptive pill residue in it
Rob Foster aka centralheatking
North Scotland 25 mile from inverness
Tested 0815
 
08.15 on a Sunday ? I would do it again on a weekday morning about 07.30 hopefully you will get same result Rob Foster aka centralheatking
Also this sounds like a rural area, there might be an area pump set that kicks in during the day. If you want to really check see what it’s like in the dead of night when a local pump set might be timed off .
Chking
 

Reply to Incoming mains 3bar flow rate 16litre permin in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
219
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the...
Replies
5
Views
324
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could...
Replies
0
Views
270
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
220
I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler...
Replies
1
Views
191

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock