Search the forum,

Discuss Kane turn around? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Millsy 82

Plumbers Arms member
Plumber
Gas Engineer
Messages
4,352
Anybody know how long it takes for Kane to carry out the calibration and return of an analyser? Mine is up in the next week and I totally forgot about it but I don't need it until Thursday afternoon so if I get it sent off tomorrow how long does it take?
 
Not sure about Kane, I used these recently Gas & Environmental Services Ltd after a recommendation from someone on here. I rented an analyser while mine was in for a repair and calibration. My rented analyser was delivered by courier the day after I called them and they collected mine at the same time. All in all I was very impressed with the service and being able to rent one while mine was with them with extremely helpful as it meant I was able to take jobs on and not rearrange anything.
 
Get mine back in about 2 days
 
kane will warranty your fga for a year, and if you are on facebook withGas Chat and post it to the norther kane workshop you get 10% discount and it takes 3-4 days
 
I normally send mine through Plumb Center and it takes about 3/4 days
 
Post it tomorrow next day signed for, some lassie from Kane will ring you on Tuesday for your c/card details and you will have it back on Wednesday.
 
Try Poole instruments, posted my FGA Wednesday and had it back Friday.
 
if you use Kane for a 455 or 456 or 457 its the cheapest option and best back up if it fails later on
 
Status
Not open for further replies.

Reply to Kane turn around? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Replies
0
Views
224
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
419
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
275
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
195
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...
Replies
7
Views
246

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock