Discuss Mira Combiflow random cold water in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Messages
1
I’m after some advice.
I’ve inherited my parents house. In the process of doing it up.
My dad got a Mira combiflow installed about 15 years ago. Over the last couple of months every so often when it’s turned on the water runs ice cold even if I turn the handle to hottest temp. All other taps in the house run hot it’s just the shower that randomly doesn’t. Is this fixable or am I looking at a new shower? If fixable what could be the issue?
 
IME Mira showers of that age are usually very repairable. It may just need 'servicing' for which there will be a kit of replacement seals, etc. Check the Mira website for availability. Personally, I would go for genuine Mira spares and avoid cheap 'compatible' alternatives you'll find on the internet.
 

Reply to Mira Combiflow random cold water in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Similar plumbing topics

D
I’m wanting to replace the single handle cartridge on my basement shower since it no longer allows hot water (sink in same bathroom works fine). I...
Replies
0
Views
335
DIYSAM
D
T
Please advise me. I am a disabled pensioner. I had a wet room fitted just over a year ago using a local authority grant. Builder was employed by...
Replies
0
Views
289
TheCatWhoNeedsaHotShower
T
Hello, and thanks for taking the time to read. I'm trying to work out if the idea I have is practical? The water pressure in my newly renovated...
Replies
3
Views
420
Hi all I really need some help or advise….. Back story….. Some years ago my dad had an extension to his house which included a newly built...
Replies
2
Views
348
I've just replaced an Ultra SASF2 – M thermostatic shower cartridge together with the spring mechanism and the temperature sensor. My problem is...
Replies
0
Views
566

Newest Plumbing Threads

Back
Top