Monobloc kitchen mixer 32mm back nut - spanner

[toucan]

Anyone coming across these tap fixing components. I'm struggling to find a box spanner to fit. The nut is about 33-34 mm between flats. New install and as far as I can see nothing apart from a box spanner will tighten this. Unless you have the opportunity fit before installing sink.

 

[ShaunCorbs]

Deep socket

 

[SimonG]

Deep socket

Sounds like a ****o.

 

[PETE 123]

Adjustable Basin Wrench

 

[toucan]

Adjustable Basin Wrench

Don't think so, not enough room anyway. I did eventually find a 34mm/40mm box. I wasn't sure the sockets would be deep enough. They are pricey also. Thanks for the suggestions. Waste of time as the tap is sh......te a cheap Flexi pull down mixer. I've no doubt it will be replaced before long -

 

[cjg]

they are crap to fit, and crap tap, if its same as one i fit you have to put in place then push tails up to connect tap on,

 

[WC1]

Why bother, get proper and save yourself the hassle both fitting and replacing it.