P
Panaplex
Just put in a brand new Moen shower cartridge and put the tap (single lever) back on. Its in the "off" position but still drips. Why?
Discuss New cartridge in. Why does the shower still drip? in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net
- Messages
- 34,374
- Solutions
- 2
Could be the body has a defect / split in the face / mating surface etc so the water is bypassing the cartridge or could be a bad cartridge
P
Panaplex
Thanks. If the cartridge is not the problem, is there anything else that could cause the constant drip?
Reply to New cartridge in. Why does the shower still drip? in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net
Similar plumbing topics
- Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
I have a brand new, unboxed shower/wet room screen from KRION purchased from Porcelanosa UK.
It is the Attica 1 model, as shown in the attached...
- Sebastian T
- Bathrooms, Showers and Wetrooms
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
-
- Sticky
We have 2 brand new cordless, battery powered press tools in stock, and flying off the shelves. Our TekTools TZ1930 & TZ1550 are packed with...
Hello all,
I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to...
Newest Plumbing Threads
-
How much would you pay for a universal flush valve that enables replacements in under 5 minutes?
- Started by Professor
- Replies: 8
-
Bossing shower waste into soil pipe vs. separate shower waste- Started by CitizenErased
- Replies: 3
-
UK Advice on waste water pump in first floor flat
- Started by kbqwert
- Replies: 3
-
AM18x1 femail to 1/2" hose connector.
- Started by Adaminspace
- Replies: 0
-
Off grid shower and toilet solution needed
- Started by TpXThinnr
- Replies: 5
-
Expansion vessel size unvented hot water
- Started by Matt0029
- Replies: 2
-
Acrylic bath manufacturing standards/dimensions
- Started by Michelle
- Replies: 2