No ch ???

[dboi78]

My Heating on my old potterton 80 combi is not coming on, I recently fitted a siemens rdj10rf to it and has been working fine for four weeks then today it was calling at the stat and receiving the signal at the receiver but boiler was not firing although there was a slight click when calling, hw is coming on fine so I ruled out firing issue, also checked connections and all were home, refitted system loop l to swl on boiler and boiler fires up straight away, I'm confused .com

Any ideas would be appreciated

 

[mcniven]

have you tried the pump?

 

[Gordon T]

Sounds like the reciever is faulty.

 

[PlumbBobBob]

your problem is the rdj10rf has gone up the spout. i had one on my system which failed after about two weeks. i changed it for a horstmann wireless one from the station that sells tools.

 

[Puddle]

:iagree:

 

[Puddle]

from the station that sells tools.

mmmm,maybe they should call it something catchy like.................. tool terminal :freak:

 

[dboi78]

Just a faulty stat then, can't even get my money back as it was given to me by my mate who is a engineer, no wonder he gave it away, can't check pump mcgivens as I don't have a multi but was whirring and getting hot and worked fine when I re fitted system loop so I'm guessing it's ok

 

[mcniven]

link out the receiver - that will give u a deff yes or no..

 

[dboi78]

Did that mate thats what I ment when I said I re fitted system loop, probably not called a system loop then I'm guessing ??

System link def sounds better ha ha !

 

[mcniven]

aw... i missed that bit about reconnecting link, deffo not pump saarry :freak: