D
dave1
Which one do you use for detecting pipes and cables in walls? How accurate do you find them?
Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)
Discuss Pipe detectors in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Status
E
Ermintrude
Estwing 1600 with the 4" pipe o matic
E
Ermintrude
Cable o matic is 6" slotted vde
- Messages
- 34,366
- Solutions
- 2
A customer with nails nice and cheap 
I don't, as much as I should own a detector I don't, just use logic and good guess work, haven't drilled a cable or pipe yet
D
dave1
It was more a case of I need to trace some pipes in a ceiling, needed to be accurate as to where they are as to limit the damage to the ceiling.
- Status
Reply to Pipe detectors in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going...
Hello all,
I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Just started gound work on self build bungalow and wondering best way to do below ground soil pipes.
For toilet I was going to go straight down...
Hello all,
I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to...
Newest Plumbing Threads
-
Blocked waste pipe - Inspection cover problem.
- Started by Urbanbassman
- Replies: 0
-
See the Stunning Before and After of These 6 Local Kitchen and Bath Makeovers- Started by Dan
- Replies: 0
-
$300,000 USD Renovation for a female boss’ semi-detached house in Yio Chu Kang
- Started by Dan
- Replies: 0
-
-
-
Do you recognise this shower drain rubber seal?
- Started by JohnHa
- Replies: 1
