Discuss Plumbing/electrics qualifications in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Matt0029

Gas Engineer
Messages
1,138
Have any other plumbers thought of getting in to electrics? If so how have you done it/what qualifications. I have looked at the city and guilds level 2 diapolma in electrics. The only thing putting me off is the health and safety sections how to put ladders up ect. And the section communication within the building trade. So 2 of the 5 sections I have already covered in my nvq level 3 in plumbing. Thanks for any advice.
 
You could always speak to whoever is delivering the course, see if they will knock money off for this aspect, though I wouldn’t hold your breath.
The formal mechanisms for this are called Accreditation of Prior Learning (APL) and/or Accreditation of Prior Experiential Learning (APEL). Administrators are not always up on the details so try to get the proposal referred to a senior tutor or course leader.
 
I did a full scope part-p course maybe 6 years ago and because I wasn't doing any calcs on a regular basis I'd forgotten how to do any of the tests within 6 months - complete waste of time.
I've also got every gas ticket under the sun and that's a waste of time too, just a big financial burden on ACS re-tests and too many nuances to remember so im often checking regs.
The system is setup for us to specialise and I'd recommend you go with that and not spread yourself too thin.
If you find a really good sparks and pair up then you can both crossover a bit but still be sht hot at your specialties!
 

Reply to Plumbing/electrics qualifications in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Replies
0
Views
240
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't...
Replies
12
Views
435
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the...
Replies
5
Views
327
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
462
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
560
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock