- Messages
- 2,718
Cool. I'll try and grab a couple sizesShould be stnd something like an 1" or 11/4" plug
Discuss Plumbing in cast iron radiators - replacing K2's in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Cool. I'll try and grab a couple sizesShould be stnd something like an 1" or 11/4" plug
Yeah maybe your right, I'll take some pics and post them tomorrow so you can see how many leaks I cause hahaI would have a look at the rads before you get any if you could
Should be stnd something like an 1" or 11/4" plug
Except that one side will be right hand thread and the other side will be left hand thread.
Didn't bloody feel like alu..They look like alu
Any problems?
Didn't bloody feel like alu..
Had to put two together but was fine actually as I could stand up both ends. No just me :/ hence why it took me all day. Aching like a bugger now.Did you have an extra pair of hands ?
And how was the putting together of the one rad ?
Had to put two together but was fine actually as I could stand up both ends. No just me :/ hence why it took me all day. Aching like a bugger now.
So am I kop! Can't say I wasn't clenching my butt cheeks when I was filling up hahaNice one jay they look the business mate glad it all worked out . cheers kop
Reply to Plumbing in cast iron radiators - replacing K2's in the Plumbing Jobs | The Job-board area at PlumbersForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.