Discuss Plumbing in cast iron radiators - replacing K2's in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
I would have a look at the rads before you get any if you could
 
You will be fine just take one step at a time don't rush
 
Have a look first jay i am sure you will be fine bud put your toe tectors on all the best kop .
 
Except that one side will be right hand thread and the other side will be left hand thread.

No plugs are right handed the joints that connect the panels together are left and right handed tho
 
Did the job, took me the whole blooming day mind!!!! Thanks for all your help guys, saved me loads of time!! That was hard work on my own man.

IMG_2238.JPG


IMG_2239.JPG


IMG_2240.JPG
 
They look like alu

Any problems?
 
Didn't bloody feel like alu..

Did you have an extra pair of hands ?

And how was the putting together of the one rad ?

Look spot on jay
 
Did you have an extra pair of hands ?

And how was the putting together of the one rad ?
Had to put two together but was fine actually as I could stand up both ends. No just me :/ hence why it took me all day. Aching like a bugger now.
 
Had to put two together but was fine actually as I could stand up both ends. No just me :/ hence why it took me all day. Aching like a bugger now.

Top banana
 
Status
Not open for further replies.

Reply to Plumbing in cast iron radiators - replacing K2's in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Newest Plumbing Threads

Back
Top