Discuss power shower or pumped shower in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

mutley racers

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
5,171
I have been asked to estimate for both. The hot water tank is 110litres and has a big old cwsc. They want it positioned above the bath. The hot water tank is on the other side of the room from the bath so no matter what, some how, I nees to run pipes to this area. Take up the floors, rip out the bath, chase into walls and so on. Or, should I just wack a pump under the bath and come of the hot and cold already there? Not ideal as not separate feeds from tanks to pump. But otherwise, it's quite a big job. All advice muchly appreciated chaps.

Good evening to you all:)
 
Just how big is the big old cwcs. You may need an extra tank depending on output of shower. Pump in airing cupboard and pipework best you can.
 
Just how big is the big old cwcs. You may need an extra tank depending on output of shower. Pump in airing cupboard and pipework best you can.

Over 50 gallons. If need extra water, is it not possible to add a couple more ball valves to cistern for it to fill quicker? I will only put a 1.5 bar shower in I thinks
 
Over 50 gallons. If need extra water, is it not possible to add a couple more ball valves to cistern for it to fill quicker? I will only put a 1.5 bar shower in I thinks
putting 2 fovs on a tank is no good you need to up the size tank most likely, and the pump should have its own dedicated hot & cold supply the hot should have a surrey flange or similar to stop air getting to pump also
 
There's only 2 people in the house. I would have thought that the cwsc will be big enough. Do you not think so then? What size tanks do people usually put in for a pumped shower? I have installed a few on a 50 gallon and not had any come backs
 
most pumps say min 80 gallon, i like to make sure if something goes wrong I've always got myself covered! I've seen showers run off 50 gallon tanks before no problem, not telling you what to do, just saying what I do,
 
Last edited:
Defo bigger tanks and come of cyl or pump will air lock all day long. U can tandem up tanks.
 
most pumps say min 80 gallon, i like to make sure if something goes wrong I've always got myself covered! I've seen showers run off 50 gallon tanks before no problem, not telling you what to do, just saying what I do,


80 gallons hey. Whoops. Next time I shall read MI'S. I kinda like being told what to do Irish!
 
Defo bigger tanks and come of cyl or pump will air lock all day long. U can tandem up tanks.

Two for bigger tanks. I am a naughty boy. I believe just adding another tank in tandem will be best. This will cost them about 900 quids for this install. Blimey
 
Well it's better than costing you ÂŁ90k in court as some one got a lovely scald!
 
Well chaps, I just downloaded the grundfos shower pump app and it says a min of a 50gallon pump. Even for a 3 bar multiple outlet pump. I still take on all ypur advice as ypu lot are a sensible bunch of guys.

It's a pretty good app I think. Has anyone ever installed a grundfos shower pump?
 
How about just wacking a pump on all hot and colds from in the flat? No extra pipework so a lot cheaper
 
also chaps, how many Bar do you think you need for an 8inch head? Showers I am talking abot you naughty boys. I cannot find any info on the cassellie showers refering to this
 
i am going to fit a grundfos Niagara 2 bar pump and was wondering if this will give an ok pressure and flow through the big shower head. i have looked through some other specs of similar showers and they require .5bar. So it will work, but, will it be any good
 
Fitting a niagra tomorrow. Presume its a 1.5. Fitting an extra shower in and sorting the pipework out.
They have a 50gallon tank and after speaking tothem about an up grade I won't upping the capacity......
Their showers are normal heads. Any larger i.e a drencher id put at least a 3bar in.
I've fitted a multi-jet on a 2bar cheap salamander before bought by customer and it was quite good when all jets were on. Suprised me

Actually, long time ago it could have been 2.5 now I think about it.....
 
Last edited:
Sorry - supposed to say 'working' on a niagra!

Personally id go for at least a 3bar for an 8"head

Theyre really happy with the pump and pressure. I wouldn't suggest anything other than a brass pump like a sturner though. I aways give them an option.
 
Last edited:
If pipework off CWSC is installed correctly you shouldn't have any chance of scolding even if a manual mixer.
 
Status
Not open for further replies.

Reply to power shower or pumped shower in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, I'm in my new build 2 years and the shower pump has died. I have an air to water unit downstairs is in the utility which I've been told is...
Replies
6
Views
276
We have a pumped shower with a thermostatically controlled mixer valve. My wife complains that when she is having a long shower (hair wash etc)...
Replies
0
Views
280
A
Hey, here goes and I hope it works.. never used one of these before! I have a Sagittarius Ergo mixer shower min bar of pressure required 1 bar...
Replies
1
Views
456
We have a gravity fed hot water system in our the house we have just recently moved into. It works fine with the downstairs shower, however we are...
Replies
15
Views
774
Hi, I'm looking for a water pump to pump water from a storage tank at a constant 3 bar pressure. It's at a campsite I run that's at the bottom of...
Replies
2
Views
166
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock