Discuss Powerflush course/refresher in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
T

tommy1712

Hi I about to get my self a nice new powerflush think I am going to go for the anton unit and take full advantage of the 10% cash back day at plumbase:)

i I have not used a flush for years, I no I will be fine as soon as I start but I just want a comfort blanket of a refresher day just to go over the chemicals and best practice again.

been trying to get hold of the powerflush association but they ain't responding to emails or answering the phone.
I am in kent if anyone knows of a course or someone want a set of hands for the day to get me back up to speed

cheers lads
 
Yes I run a course in newcastle.

400 quid for the day
Included is fish and chips for lunch
And a night on the lash in north shields.

I cover all aspects of training from...

What is a powerflush and how to plug it in.
What chemicals are best to use and do they have any illicit purposes.

1 pipe 2 pipe 3 pipe and 4 pipe systems.

And how to keep a straight face when ya paying me.

...any good ???
 
Are you paying for the **** up lol. Sounds good but far to far mate.

i done flushes before but not for a long time
 
The only good course is a golf course. Which is a waste of a good walk. Read the mi,s and you will be fine.
 
Yes I run a course in newcastle.

400 quid for the day
Included is fish and chips for lunch
And a night on the lash in north shields.

I cover all aspects of training from...

What is a powerflush and how to plug it in.
What chemicals are best to use and do they have any illicit purposes.

1 pipe 2 pipe 3 pipe and 4 pipe systems.

And how to keep a straight face when ya paying me.

...any good ???
Yes I do the same down here in Devon, Only difference you get Pasty & Chips, and if you pass , a free turnip !!
 
The only good course is a golf course. Which is a waste of a good walk. Read the mi,s and you will be fine.

Have to agree. Golfers, ventriloquists and trainspotters all suffer from the same genetic defect.
 
Yes I run a course in newcastle.

400 quid for the day
Included is fish and chips for lunch
And a night on the lash in north shields.

I cover all aspects of training from...

What is a powerflush and how to plug it in.
What chemicals are best to use and do they have any illicit purposes.

1 pipe 2 pipe 3 pipe and 4 pipe systems.

And how to keep a straight face when ya paying me.

...any good ???

Sounds like a good course, do you take groups of 20 or more lol
 
Only if they're bang tidy women.
Then they get free lambrini
 
Last edited by a moderator:
How many people who do powerflushes, do it on their own?
 
It's not possible to get as thorough a flush as you do when you have two people doing the flush.
 
It's not possible to get as thorough a flush as you do when you have two people doing the flush.

If you know what you are doing, one person can do the job, no probs at all. It doesn’t matter one, two of four, at the end you just have to split the dosh between more people.
 
You can't forward/reverse the flow on your own....no matter how good you are....you need the turbulence in the system whilst flushing.
 
You can't forward/reverse the flow on your own....no matter how good you are....you need the turbulence in the system whilst flushing.

Really? U can even make an auto change over with two 3 ports and a timer.
 
Trying to figure out what im missing here.
My powerflush has a forward and reverse just like my van.

I want it to go forward I push the knob that way.
I want it to go back I pull It this way.

Just like my van
 
You can't forward/reverse the flow on your own....no matter how good you are....you need the turbulence in the system whilst flushing.

I take it you are not using KAMCO. Cos, the flow rate they have is more than double that of most power flushing pumps on the market. Sludge and corrosion deposits are dislodged by high velocity water, the direction of which can be reversed instantaneously to create turbulence in radiators.
 
Trying to figure out what im missing here.
My powerflush has a forward and reverse just like my van.

I want it to go forward I push the knob that way.
I want it to go back I pull It this way.

Just like my van

I bet you can go sideways if you want to! :smile:
 
Yes I do use Kamco...but apart from Ermintrudes idea, how do you forward /reverse flow on your own? Kamco training even said that you need to constantly change flow.
 
150L per min flow rate I believe.
 
Also you're braver than me to do it on your own!
 
Sideways too .....

Never tried......

Too busy playing with my knob
 
Last edited by a moderator:
Status
Not open for further replies.

Reply to Powerflush course/refresher in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

We live in a 1980s four-bedroom detached house. The time has come for new central heating. The current system is a mild revision of the original...
Replies
13
Views
2K
V
Good morning, I thought I would try here first before going elsewhere. in short I had a septic system flexible coupling needing replacing. Backed...
Replies
3
Views
440
Hello all. I've just joined, was going to post in the new members forum, but the first site generated email sent me here... I am here, as have a...
Replies
21
Views
3K
I am generally a decent handyman, can usually make 2+2=4 and take care of most things to avoid troubling experts with just the basics, but know...
Replies
8
Views
966
We have just moved in to a 1934 Semi- and I am getting round a few simple DIY tasks, including a couple of plumbing-part renewals such as modern...
Replies
8
Views
652
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock