Discuss Radiator Single Entry Point in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
9
Hi, can anyone tell me if this is possible, and if i would need to fit the internal 'lance' to a some sort of valve? Or do radiators come with the lance already installed?

WhatsApp Image 2019-03-29 at 14.24.44.jpeg
 
Have a couple of single entry valves on my home system, been in for years. Work okay except one stopped for some reason, took valve out and found the 'lance' (injector pipe) had dropped off. Screwed back in and all okay again. Will be replacing with 'proper' connections when I upgrade the rads and fit TRVs. The injector pipe is about 9" long on a 3'6" rad and seems to get heat throughout the whole rad.
 

Reply to Radiator Single Entry Point in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello all, I live in a flat that has communal heating through a single pipe system. I recently had replaced a deco flat panel (waffle) radiator...
Replies
3
Views
651
Hi, Sorry if question already answered in previous posts, but I can't find a solution to the below: We recently moved house to a new home that...
Replies
7
Views
552
Hi I have a leaking TRV on a downstairs radiator and need to get it replaced/fixed. Can anyone on here tell me the average cost to have this done...
Replies
3
Views
342
P
  • Question
Boiler is SIRIUS THREE FS 70 Potterton commercial. Situation: We are small building contractors and my labourers managed to damage the radiator...
Replies
2
Views
201
Hi, I'm wondering if this is allowed or will work in the UK. We currently have all our waste water connecting to a single vented stack. The pipes...
Replies
4
Views
618
Back
Top