Discuss ravenheat high flame cutting out in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
L

lowrider1

hello

need some help ive had the fan and air pressure switch replaced on my reavenheat. 85 cs but high flame the flame cuts out ?
 
Who did repairs? Were they gas Safe? If so get them back if not get someone in who is for your safety. No diy gas info will be given on this forum. Read the rules.
 
You wont get gas advice on here mate we cant give it out for safety reasons you need to get your gas safe engineer back i know its a pain but be safe a little knowledge can kill you .
 
Status
Not open for further replies.

Reply to ravenheat high flame cutting out in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Replies
0
Views
236
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't...
Replies
6
Views
352
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could...
Replies
0
Views
265
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to...
Replies
6
Views
285
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
314

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock