Search the forum,

Shower drain cover replacement

Post new thread

Discuss Shower drain cover replacement in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

B

Bagshot

Messages
23
Please see attached pic. . . . I would like to replace the drain cover in my ensuite shower. Also, I am hoping, if possible, to replace the top part without taking the shower basin out (is that possible)? How / what with?
 

Attachments

  • shower_drain.png
    shower_drain.png
    2 MB · Views: 19
I have taken the top off and more pics (attached) . . if you could take a look and tell me what I have and what will replace it I would be grateful. It is 4cm deep (length) and the base diameter is 48mm
 

Attachments

  • IMG_0928.JPG
    IMG_0928.JPG
    317.3 KB · Views: 12
  • IMG_0931.JPG
    IMG_0931.JPG
    521.3 KB · Views: 13
You could try this

www.toolstation.com

McAlpine STW3-R 19mm Water Seal Shower Trap

• 19mm water seal• Suitable for shower trays with a 50mm waste hole• 1½" BSP thread• 1½" universal outlet• Waste grid and dip tube removable to facilitate easy cleaning• Flow rate 50 L/min when tested under a constant 120mm head of water in accordance with clause 5 of BS EN 274-2:2002• Overall...
www.toolstation.com www.toolstation.com
 

Reply to Shower drain cover replacement in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

sammie81116
Sewer pipe problems not sure about it
Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my toilet a good few times nothing is going to the sewer so don't know is there a blockage or what way it works many thanks and advice would be grateful
Replies
3
Views
492
Chuck
C
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
194
SimonG
SimonG
W
Outdoor Tap at Porch
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
225
Dave Moore
D
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
242
exedon2
exedon2
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
321
Chuck
C
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock