good evening guys I have a couple of the above boilers to service shortly and would appreciate if anybody could point me in the right direction for manf spec all I know Is there fitted with riello 3gb burners my problem is I have tried the net with no joy and want to make sure they are set up properly with nozzles pressure etc they will be fga on completion any pointers at all would be much appreciated regards jensda
- Thread starter jensda
- Start date
- Replies 2
- Views 2K
- boiler
- oil oil boiler sime
Discuss sime ar4 oil boiler in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Reply to sime ar4 oil boiler in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
- Question
Boiler is SIRIUS THREE FS 70 Potterton commercial.
Situation: We are small building contractors and my labourers managed to damage the radiator...
Hi all. Hope you have all been keeping well.
A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
- Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...