- Messages
- 2
Hi - Im trying to remove this seat - i have tried pushing in the white buttons and prising them off but no joy - keen to see if anyone can offer some advice !!
Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)
- Thread starter AlanClarke10
- Start date
- Replies 2
- Views 745
- close removal
Discuss Soft close seat removal in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net
Reply to Soft close seat removal in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net
Similar plumbing topics
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Hi bit of a weird issue, I installed a grohe bathroom tap successfully 2 months ago bought from screwfix.
Last week the right hand hot tap makes...
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for...
Hi
Does anyone recognise the make/brand of the radiator valve. It leaks when closed and Iam hoping I can replace a seal etc?
Newest Plumbing Threads
-
Off grid shower and toilet solution needed
- Started by TpXThinnr
- Replies: 0
-
Need a reliable emergency plumbing or emergency electrician services
- Started by levi_shah
- Replies: 0
-
Expansion vessel size unvented hot water
- Started by Matt0029
- Replies: 2
-
Acrylic bath manufacturing standards/dimensions
- Started by Michelle
- Replies: 2
-
-
Daryl Shower Head replacement (possibly over 30 years old)
- Started by morrig47
- Replies: 0
-
Can someone please identify what this hose is?
- Started by louisjamesbanks17
- Replies: 1
