Search the forum,

Discuss The Richard3009 questions in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Best

Esteemed
Plumber
Subscribed
Messages
10,034
This guy seems to be a right Richard!
I answered (vaguely) his post earlier about what type oil hose he needed for his boiler.
Now he has a post about what “ballpark” figure for oil pressure on his boiler!
He has been largely just on here over a long period basically asking details of how to work on his own oil boiler.
Frankly I ain’t helping him.
 
thought you would like him :D
 
thought you would like him :D

I just immediately knew you had that green smiley face on your post with my username for a good reason. :)
Oil hose replacement was annoying me to help him, (I thought maybe more to this, is he servicing it all?) but then later when I saw he has another post asking for oil pump pressure, I just had enough of him.
 

Reply to The Richard3009 questions in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
251
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
243
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
323
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
114
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
184
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock