Search the forum,

Discuss TWS Mains Boost Plus System - any experience? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
4
Hi, I've been speced a 45oltr TWS Mains Boost Plus for a client based on a 250lt unvented cylinder and 4 bathroom, 4 storey residential property.

Has anyone got any experience or reviews on this system and how effective, any problems e.t.c?

Any thoughts would be really appreciated?

Thanks
James
 
depends whats the incoming flow and pressure like?
 
as long as they know they wont be able to have two showers running at the same time your fine

shower and hot tap will do fine

any reason your flow rate is down
 
as long as they know they wont be able to have two showers running at the same time your fine

shower and hot tap will do fine

any reason your flow rate is down

Why cannot run two showers at same time? That was the point thought that was the obvious we could run it all for around 11 minutes we've been told!
 
Why cannot run two showers at same time? That was the point thought that was the obvious we could run it all for around 11 minutes we've been told!

Would at a push two stnd ones but nothing like rain heads

Don't forget you can't pump mains above 20lpm so your kinda capped there
 
As shaun has mentioned the more taps you open in the same time the less water pressure you will have
 
you need to be installing the TWS mainsboost water performance system check out their web site there is a video explaining every aspect of water supply . regards kop
 
Status
Not open for further replies.

Reply to TWS Mains Boost Plus System - any experience? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
362
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
311
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
153
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
149
Hello I am looking to install a slimline dishwasher (integrated) into a cupboard in my kitchen. The depth of the dishwasher is 550mm and the depth of my cupboard is larger than this. The issue, however, is that the waste pipe which leads from the sink (next door cupboard) comes out quite a...
Replies
22
Views
420
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock