B
Billy Bob Bob
Any Vaillant guys on here? need a flue elbow for a 6 year old ecotec,will part number 303910 fit?Leo?
Discuss Vaillant ecotec flue bend in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Status
- Messages
- 1,824
https://www.priorityplumbing.co.uk/...bow-HTGVH365?gclid=CL7q3KWWkNICFUqT7QodzDoIbA
The above is good for the ecotec +, but all I've ever done is ask for a Vaillant elbow and fitted it, aren't the fittings the same across the board? (as in the Vaillant 60/100 range)
The above is good for the ecotec +, but all I've ever done is ask for a Vaillant elbow and fitted it, aren't the fittings the same across the board? (as in the Vaillant 60/100 range)
- Status
Reply to Vaillant ecotec flue bend in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
Hello,
I am looking for a heating engineer to diagnose and resolve an issue with my Vaillant EcoTec 832 combi boiler.
Job Location: Copeland Rd...
Vaillant Ecotec Plus 832 boiler is 13 years old, 4 of which since we've been living there, started to play up in last couple of months. An...
Hi all. Hope you have all been keeping well.
A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
I just had a quote for a new boiler install as follows
I dont undertand why a 15-60 boiler pump is needed and a 25-100 pump is needed as well
I...
Hi, I am replacing our 11 year old boiler (due to H.Ex. leak) with a new one. This is in a "sealed" system with red expansion vessel in airig...