Search the forum,

Discuss Waste size slightly smaller than inch and 1/4 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
M

mikeyc

Went to an emergency call out today at a hair salon that has a load of foreign basins and traps are all leaking. I need to change them out but my problem is that the waste shank is slightly smaller than inch and 1/4 - like almost fits.

Anyone know any other sizes it could possibly be or suggest where to start looking.

Cheers in advance for any pointers
 
35mm?
 
Went to an emergency call out today at a hair salon that has a load of foreign basins and traps are all leaking. I need to change them out but my problem is that the waste shank is slightly smaller than inch and 1/4 - like almost fits.

Anyone know any other sizes it could possibly be or suggest where to start looking.

Cheers in advance for any pointers

1 1/4 push fit ?
 
No I mean the actual threaded shank on the bottom of the waste is smaller than 32mm so a 32mm trap is too big to screw on. Can't change the wastes as these are a god awful shape, size and design
 
Solvent 1 1/4" is 36mm, push fit is 35mm and Euro size is 32mm.
If it is Euro you will need an adapter like a mcalpine S28
 
As tamz said if it was me i'd swap the wastes out in the sink to standard uk size
 
had quite a number of sink wastes that normal traps wont sit on correctly recently, blumin euro carp.
 
Status
Not open for further replies.

Reply to Waste size slightly smaller than inch and 1/4 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
177
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
282
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
392
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock