wetroom shower drain

[Stants]

Just install a rodding eye externally into the tee

Hi Shaun ive look online and I cant see where or how you can install a rodding into a 40 or 50 tee / Elbow any ideas please

Thanks

 

[ShaunCorbs]

https://www.NoLinkingToThis/p/floplast-solvent-weld-access-plug-white-50mm/72586

https://www.NoLinkingToThis/p/floplast-solvent-weld-equal-tee-white-50mm/62719

you can get them in black aswell just not from screwfix

 

[Stants]

https://www.NoLinkingToThis/p/floplast-solvent-weld-access-plug-white-50mm/72586

https://www.NoLinkingToThis/p/floplast-solvent-weld-equal-tee-white-50mm/62719

you can get them in black aswell just not from screwfix

Ah ok I see so you use a Tee instead of an elbow and put the fitting whichever way you want to Rod / Inspect either horizontal or vertical ? is that correct

 

[ShaunCorbs]

Correct

but as it’s 2” the hole is big enough to flexi rod either way

 

[Stants]

Correct

but as it’s 2” the hole is big enough to flexi rod either way

Ah I see ill go vertical then as on the other end of the horizontal run ( where it goes into the stack ) I've put an access boss in so should be covered all ways . Cheers

 

[Ric2013]

Ah I see ill go vertical then as on the other end of the horizontal run ( where it goes into the stack ) I've put an access boss in so should be covered all ways . Cheers

View attachment 61152

Someone who cares about rodding access. Hallelujah!

 

[Stants]

Someone who cares about rodding access. Hallelujah!

Ha Ha you should see what I'm putting in Access wise there's more access points than Katy price lol
getting up there to rod them is another matter but there in just in case