Search the forum,

Discuss Which Van Do You Use? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
My dad has a transit,engines bomb proof but transits rust badly,reason i went for the citroen is it has the transits engine but does not rust,though there are millions of transits on the Road,though they are very common to get broken into see here

Which Transit engine does it have please Gas Man ? is it the MK6/7 engine or the latest Custom engine ?
I used to have a Mk 6 & loved it but the rust was a bit of an issue. Be time for a new van next year so doing a bit of research. :)
 
Which Transit engine does it have please Gas Man ? is it the MK6/7 engine or the latest Custom engine ?
I used to have a Mk 6 & loved it but the rust was a bit of an issue. Be time for a new van next year so doing a bit of research. :)
its the mk7 2.2 puma,not the mk 6 2.0 durotorque ,though the puma is based on the mk6 lump its more complex
 
its the mk7 2.2 puma,not the mk 6 2.0 durotorque ,though the puma is based on the mk6 lump its more complex

Thanks. May be I'll take a look at them when the time comes.
They used to use the Peugeot HDi engine didn't they ?
 
Thanks. May be I'll take a look at them when the time comes.
They used to use the Peugeot HDi engine didn't they ?

2.0 hdi was very similar to the transit,psa (citroen/peugeot) make both the 2.0 and 2.2,Ford make the same engine under licence
 
Landrover Defender 110 TD5 hardtop all terrain plumbing command unit. In blue!!
 
Have a 2013 Renault trafic meself. I kno the French vans get a loada flak but it's me 4th one over maybe 12-15yrs without major grief.
 
Vauxhall Vivara 2007
2900 LWB

Vans running gears have been amazing.

I like the look of the transit custom van though so will be between a new Vivara and a custom next year when it's time for a new van
 
Vauxhall Vivaro 06 lwb other than timing belt needed to be changed at 40k nothing else has popped its head up
 
09 plate transit. Put 15k on it in the last 6 months but love it. Just need to sort the racking out.
 
Landrover Defender 110 TD5 hardtop all terrain plumbing command unit. In blue!!

Very tasty! What's the hardtop like for use every day? I've got a 110 utility that I put the seats flat and use if the T5 is in the shop; find it a bit high for constant loading/unloading tho....
 
Vivaro 1.9 lwb 2012 model. Much better engine than the previous model, no issues to date.
 
Picked up a 65 plate Vauxhall vivaro sportive 1.6 bi-turbo yesterday :)
 
Status
Not open for further replies.

Reply to Which Van Do You Use? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
180
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
286
    • Like
  • Sticky
We have 2 brand new cordless, battery powered press tools in stock, and flying off the shelves. Our TekTools TZ1930 & TZ1550 are packed with advanced features - these cordless press tools are engineered for speed, precision, and ease of use across various applications. Just reply to this thread...
Replies
5
Views
951
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it šŸ˜¬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
296
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
306
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock