Discuss White strainer wastes in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

armyash

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
2,653
Hi guys,

been asked to fit x2 white strainer wastes on a kitchen sink. Where can I get good quality ones?

seen a few online but don't want to risk ordering rubbish.
 
the reason they fail is a) when the connecting waste pipework is under strain b) when no silicone is used on the seals.

make sure both of those are ok and even the cheapest one will last ages. although the seal on the plug but might want replacing.
 
Status
Not open for further replies.

Reply to White strainer wastes in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi! Totally inexperienced DIY newbie so bear with me for descriptions! Pictures hopefully help. I’m trying to remove an unused downstairs toilet...
Replies
1
Views
292
We have a utility room with a washing machine but no sink. Wife wants sink. There is room to fit one and the waste will connect to wahing machine...
Replies
22
Views
536
Hi, a couple simple questions. 1. I have two pipes like seen on a attached photo in my back yard. One is for the waste from kitchen, the other one...
Replies
2
Views
234
Hi, We're in the process of upgrading 2 bathrooms in our house: the ensuite and the family bathroom. These adjoin one another. The ensuite is...
Replies
3
Views
69
Hi everyone I hope you can help. We were getting some work done and our builder attached the boiler condensate pipe to the sink waste pipe. This...
Replies
5
Views
399
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock