Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Millsy 82

Plumbers Arms member
Plumber
Gas Engineer
Mar 18, 2012
4,350
2,045
113
What do you say to them? I've just had someone that want a radiator installing in an annexe and would like me to go round and give them a price and size the radiator for them to order!

I said it's not something I normally go out to to price and you would be looking half a day plus parts.

He was then going on about not wanting to order the wrong rad etc

What do you do? I said I will go round and size it and charge him an hour and he said can I pay you once its complete?

Do you go out and price small jobs like this or what do you say?
 
What do you say to them? I've just had someone that want a radiator installing in an annexe and would like me to go round and give them a price and size the radiator for them to order!

I said it's not something I normally go out to to price and you would be looking half a day plus parts.

He was then going on about not wanting to order the wrong rad etc

What do you do? I said I will go round and size it and charge him an hour and he said can I pay you once its complete?

Do you go out and price small jobs like this or what do you say?

Tell him you want paying for the visit & use of your expertise but you'll knock if off the job if you get it. Then up the job price by an hour. That way no losers.
 
I smell fishy get you to go out measure the rads and never call you again

That's what I've had. If I put the time of the quote on the job then I'm too expensive but they have the size of the rad.

At the moment though I've gone dead. All I seem to be getting is jokers! Bring on the winter.
 
That's what I've had. If I put the time of the quote on the job then I'm too expensive but they have the size of the rad.

At the moment though I've gone dead. All I seem to be getting is jokers! Bring on the winter.

I’ve stopped listing sizes of rads on any paperwork I do just say double panel etc
 
If local I don't mind stopping by on my way home or before first job etc to take a look at the job. I wouldn't be handing over the heat loss calculation details to a customer until the job is guaranteed.
 
Ask him to give the room measurements over the phone - then you can size it from that, saves a trip and only takes a few minutes.

Tried that still insisted on coming round so I said ok but I will have to charge you.
 
I was going to do a quote tonight
Boiler service
Remove fire
Chase some pipes into the wall

Message earlier -someone else has now done the gas bits, can I just quote to chase the pipes in?
I didnt go as traffic was bad
 
I was going to do a quote tonight
Boiler service
Remove fire
Chase some pipes into the wall

Message earlier -someone else has now done the gas bits, can I just quote to chase the pipes in?
I didnt go as traffic was bad

Surprised they didn’t message you to say someone else has done everything except unblock and clean the toilet and could you do it? 🙄
 

Official Sponsors of Plumbers Talk

Similar plumbing topics

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.