seeking experienced advise on an intermittent fault on ideal logic combi?

[garygvl]

when you did the full service what did you test

 

[farrellyheating]

Is that at max rate?
Does it dip at all on initial fire up?

Yes max rate and no dip that I noticed.
[automerge]1574590809[/automerge]

when you did the full service what did you test

Vessel pressure, inlet pressure, working pressure, gas rate, combustion.

 

[Scott_D]

Cleaning the brass Venturi
Washing through the heat exchanger
Checking spark gap
Cleaning the condense trap and rubber hose are part of Ideals ‘full service’

 

[farrellyheating]

Cleaning the brass Venturi
Washing through the heat exchanger
Checking spark gap
Cleaning the condense trap and rubber hose are part of Ideals ‘full service’

Yes. All done. All advised by Ideal tech support but had an ignition lock out a week later. Reset and everything is fine for a week or two then it reoccurs.

 

[garygvl]

need to check flame current on ignition

 

[Excite]

I had a similar issue, cleaned venturi....there was a little debris. now sorted

 

[garygvl]

have you sorted this yet