what can i expect from a 'free boiler' installation

[chucka]

Hi..

We have applied for and are having a 'free replacement' boiler under the government scheme.

They will fit a Potterton Baxi replacement (tank fed) and Plume kit? boiler exhaust outlet is close to a kitchen window apparently

I'm just wondering what to expect apart from draining the system and hooking up the new boiler.. My old boiler is an Ideal Classic LXFF & FF Fanned Flue Gas Boiler

appreciate your comments

 

[SimonG]

To be honest, what do you want for nowt?

Depends who the company you've signed with have subbed it out to.

And do bare in mind that whoever arrives to fit it was the cheapest they could find 👍

Maybe update with some photos of before and after once done.

 

[chucka]

To be honest, what do you want for nowt?

Depends who the company you've signed with have subbed it out to.

And do bare in mind that whoever arrives to fit it was the cheapest they could find 👍

Maybe update with some photos of before and after once done.

Well it may sound like a complaint but it was purely to know what to expect..
Needing to clear rooms for him to access radiators etc

And no it isn't totally free to us either.
But thanks for your reply

 

[SimonG]

Trying a bit of levity with the opening, Yorkshireman here.

How much you having to put to it and why if you don't mind me asking?

 

[chucka]

Trying a bit of levity with the opening, Yorkshireman here.

How much you having to put to it and why if you don't mind me asking?

I apologise..

The surveyor has a scale of approval.. He worked out out to £460 contribution.. I don't know the true cost of ' just a boiler' but I know we're getting more than we paying. I don't know what access he needs in various places.. Want to help where I can..I used to be self employed and know the difference between a pleasant customer from and an awkward one

 

[ShaunCorbs]

Seems like your paying around half

as for access make sure all the rads are accessible and no unnecessary clutter is around, in the loft round the tanks are clear

 

[Stu-B]

Make sure they flush all the radiators and pipework... especially when they tick the box in the benchmark to say they have 😁

£460 looks like you’re paying the labour cost

 

[SimonG]

I apologise..

The surveyor has a scale of approval.. He worked out out to £460 contribution.. I don't know the true cost of ' just a boiler' but I know we're getting more than we paying. I don't know what access he needs in various places.. Want to help where I can..I used to be self employed and know the difference between a pleasant customer from and an awkward one

No need to apologise. Probably didn't come across as I intended.

As for access pretty much same as above. Radiators, boiler and loft for tanks.

 

[snowhead]

And don't sign anything to say you're happy with the installation unless you really are.
You'll struggle to get anyone back to finish off anything they've missed.

The Energy Suppliers pay for most of the costs, if not all.
I suspect the installers are either on a fixed price per unit and win some loose some or are on very tightly controlled costs so can't afford to make return visits (or risk loosing money).

And it's probably too late to query it but check the length of warranty, I was looking the other day and saw an advert from an approved Eco installer stating 2 year warranty on a Worcester boiler, it's normally 5 or 10 years.
I assume the Energy suppliers are buying direct and getting a lower price with less manufacturers warranty.

 

[chucka]

Make sure they flush all the radiators and pipework... especially when they tick the box in the benchmark to say they have 😁

£460 looks like you’re paying the labour cost

Thanks Stu-B Is flushing, when 'just' fitting a boiler, classed as a standard thing or up to the fitter's discretion? Would that mean taking the radiators off or hooking up a filter system (which I have seen mentioned here and seen on YouTube... some large magnetic device?)

I don't want to make waves if it is optional.. I don't like confrontation at the best of times... LOL

I don't like flying blind.. if you know what I mean..

 

[snowhead]

Flushing the whole system is usually a requirement of boiler manufacturers warranty.

From Pottertons T&C for Warranty claims,,

https://mediacdn.baxi.co.uk/-/media/websites/baxiuk/sagittarius/terms/warranty-terms.pdf?v=1&d=20190130T160343Z&_ga=2.100312350.1423681562.1596473760-1733403557.1594828820

11.Boilers which have not been:
Installed and set up strictly in line with the installation instructions supplied with them (including the requirement to clean the system and add corrosion inhibitor in line with BS7593:1992); or maintained strictly in line with the maintenance instructions supplied with them; or where parts other than Baxi Genuine Parts have been used in any service or repair; or where the Benchmark checklist has not been properly completed

 

[chucka]

Flushing the whole system is usually a requirement of boiler manufacturers warranty.

From Pottertons T&C for Warranty claims,,

https://mediacdn.baxi.co.uk/-/media/websites/baxiuk/sagittarius/terms/warranty-terms.pdf?v=1&d=20190130T160343Z&_ga=2.100312350.1423681562.1596473760-1733403557.1594828820

11.Boilers which have not been:
Installed and set up strictly in line with the installation instructions supplied with them (including the requirement to clean the system and add corrosion inhibitor in line with BS7593:1992); or maintained strictly in line with the maintenance instructions supplied with them; or where parts other than Baxi Genuine Parts have been used in any service or repair; or where the Benchmark checklist has not been properly completed

This is really useful to know.. I suspect any boiler supplier would require this. You wouldn't change a car engine and put the previous engine's used oil in it?.. apart from the YUK!

 

[SJB060685]

This is really useful to know.. I suspect any boiler supplier would require this. You wouldn't change a car engine and put the previous engine's used oil in it?.. apart from the YUK!

When a replacement boiler is installed manufacturers require the system to be flushed to honor the warranty and hopefully prevent premature problems caused by dirty systems. It doesn't matter whether its a gas boiler, or oil boiler etc the system should be flushed. Depending on the original install and the state of existing system a flush could be a few hours, or it could take a couple days if larger than usual or incredibly fouled.

 

[chucka]

When a replacement boiler is installed manufacturers require the system to be flushed to honor the warranty and hopefully prevent premature problems caused by dirty systems. It doesn't matter whether its a gas boiler, or oil boiler etc the system should be flushed. Depending on the original install and the state of existing system a flush could be a few hours, or it could take a couple days if larger than usual or incredibly fouled.

This is great information!

I suppose it's up to the installer, how he does this job..

Grateful..

 

[Stu-B]

This is really useful to know.. I suspect any boiler supplier would require this. You wouldn't change a car engine and put the previous engine's used oil in it?.. apart from the YUK!

It’s a fat cat industry these days and right at the bottom of the pile is the boiler fitter, who is doing most of the work and getting paid the least. The firm who dishes out the work will be squeezing as much as they can from the fitter, I heard on the grapevine that these guys were getting half a days money per fit, so massive corners needed to be cut by them to in order to earn a decent living, first thing to go was flushing, second thing commissioning because let’s face it, if you’ve commissioned one then they’re all the same..... ish 😉

 

[ShaunCorbs]

It’s a fat cat industry these days and right at the bottom of the pile is the boiler fitter, who is doing most of the work and getting paid the least. The firm who dishes out the work will be squeezing as much as they can from the fitter, I heard on the grapevine that these guys were getting half a days money per fit, so massive corners needed to be cut by them to in order to earn a decent living, first thing to go was flushing, second thing commissioning because let’s face it, if you’ve commissioned one then they’re all the same... ish 😉

will just leave this here

 

[EvilDrPorkChop]

will just leave this here

It's a joke isn't it. Last time I was renewing my gas there was a guy on there doing this type of work. He was doing combi conversions in a day with him and an apprentice, full TRVs. I dread to think what the work was like, i've seen other work done where we've lost out and it's usually dreadful.

 

[SJB060685]

@ShaunCorbs that is disgraceful! Two boiler swaps in one day? Theres absolutely no chance of a thorough and professional job

 

[ShaunCorbs]

@ShaunCorbs that is disgraceful! Two boiler swaps in one day? Theres absolutely no chance of a thorough and professional job

only going to get worse with the eco grants coming down the line maybe

 

[snowhead]

What the above doesn't say is the Candidates must also be conversant with Covid safe working and implement it, which of course will add time to the jobs. Unless that advert was pre Covid.

As this work is ultimately being paid for by the big Energy Companies I wouldn't be surprised if they are going to be using auditors spot check.
The last thing they want is bad publicity around Covid.
Local Covid lockdowns are likely to affect whether a job can be done or not.