gas pipe/gas meter to fuseboard?

[Scott_D]

Fitting a boiler and the gas meter and outlet gas pipe are less than 150mm from the fuseboard.
Is this NCS?

 

[Aquarius]

Would have thought so, any way of separating with some boxing/panelling?

 

[ShaunCorbs]

Depends how close if it’s like 140 yes ncs if closer than 50mm would ar it but leave on but if I had a piece of hardie backer board on the van easier to sort it there and then

 

[Scott_D]

Its pretty close
Fuse board and smart meter are new

 

[Harvest Fields]

Is that in Erdington?

 

[Scott_D]

Is that in Erdington?

Bristol. Seen one similar?

 

[Harvest Fields]

Few like that around by me. Looks very similar.

 

[ShaunCorbs]

Would say that’s 25mm (reg for gas and cables)

 

[Aquarius]

Would say that’s 25mm (reg for gas and cables)

Thought it was 150mm for switch gear, is this not switch gear?

 

[ShaunCorbs]

Thought it was 150mm for switch gear, is this not switch gear?

high voltage so would class it as main head eg 100amp fuse etc or meter tails

the consumer unit is metal so there should be any arc or transmission to the gas pipe from the board

 

[Scott_D]

I always thought it was 25mm for to a wire and 150 from switches, fuse boards etc

 

[Aquarius]

I always thought it was 25mm for to a wire and 150 from switches, fuse boards etc

I thought it was, but sockets and light switches are just 25mm.

 

[ShaunCorbs]

Anything from the sparkie who changed the board recently within the last year ?