Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Search results

  1. U

    Mixer valve set up not controlling temperature

    Hi there, as you've said - looks like the mixing valve doesn't do anything. I've done some research and I think replacing your mixing valve with Esbe VTA232 will be the best option. It has to be the 323 version as it will have flow, return and mixed water at correct ends. You might need to...
  2. U

    Flow and return the wrong way around

    I haven't I'm afraid.
  3. U

    Flow and return the wrong way around

    Good morning, I don't think the actuators became damaged but you never know. Pump - same again, difficult to judge. Flow rates - they will depends on circuit lengths. Many thanks, Uheat – Wojtek
  4. U

    Flow and return the wrong way around

    I think is a Polypipe manifold. It doesn't make any difference to be honest, you can swap the bars around anyway. Thanks, Uheat – Wojtek
  5. U

    Flow and return the wrong way around

    Good afternoon, it looks like a Polypipe manifold to me which has got the flow meters at bottom bar. The control pack is not Polypipe, looks like Rifeng Inta Eco Ecomix. What you need to do unscrew the manifold bars from the brackets and swap them so flow meters will be at the top of the...
  6. U

    Problem with UF Heating Heatmiser Thermostats

    Hi there, it sounds very strange. We supply Heatmiser controls since few years to be honest we hardly got any problems with them. Have you been asked to return them to your supplier so they could send them back to Heatmiser for testing? Heatmiser will take them into the pieces and check what...
  7. U

    Manifold identification

    Hi Steve@smv, I don't recognise the brand of the manifold I'm afraid. It's not very easy to find right pin valve as they might have a different foot/plunger at the bottom, or different thread pitch and the whole valve lenght could be different. If you would have a chance to remove one and post...
  8. U

    Thumping manifold, bouncing flow meter

    Hi Wayne, does it just happen to one flow meter? I've had a customer week ago with exactly the same symptoms at Uponor manifold. He replaced the flow meters and the noise is gone. Thanks
  9. U

    Thumping manifold, bouncing flow meter

    Hi Wayne, does it just happen to one flow meter? I've had a customer week ago with exactly the same symptoms at Uponor manifold. He replaced the flow meters and the noise is gone. Thanks
  10. U

    help plz

    Hi guys, sorry about the delay in replying. drewbigun1 if you would like me to have a look at the desing please email it to me and I'll have a look at it. Thanks a lot
  11. U

    help plz

    Hi guys, sorry about the delay in replying. drewbigun1 if you would like me to have a look at the desing please email it to me and I'll have a look at it. Thanks a lot
  12. U

    Myson Actuator Issues

    Hi Robaxter02, you are correct, looks like an actuator is gone. The reason why there's so warm now in that room is because there's no actuator to restrict the flow to that circuit. Please let me see the photo of your manifold and I'll see if I can supply an actoatur for you.
  13. U

    Electric underfloor heating

    Hello everyone, Steve, we do 6mm XPS polystyrene boards which can be installed by using 1-2 mm flexible tile adhesive. Heating mat goes on top. I totally understand you don't want to have a little step but if you use the insulation boards we know the UFH will work and will be more efficient and...
  14. U

    Can any boy help ?/ want the job?!!

    Good afternoon everyone, I'm got a good installer not far from you (less than 20 miles). Please give him a call and mention you have got a number from Wojtek @ Uheat. MIP Heating Peter 07917 728333 If we won't have a time to do it he should be able to give you someone else number. Hope that...
  15. U

    pexathem U/F Heating spares

    Hi there, they might be standard size so you might be able to use different manufacturers. I would try this company: Pexatherm Underfloor Heating Systems It looks like they supply Paxatherm manifolds so they might have some spares. I'll be away next week so I would like to wish a Merry...
  16. U

    ufh under kitchen unit

    Good morning Chris Watkins and ShaunCorbs, I'm sorry about the delay but the top man in technical @ Factory was away for a while. Here's some details about 32m pipe and how much heat can it carry: Temp. 90/70 80/60 70/50 70/55 60/50 55/45 d32x3 32000W...
  17. U

    Swap actuator head - Wavin

    Hi there, I don't know how to remove these ones I'm afraid. The other type Wavin does is a "clip on" type and you have to press two tabs to remove it but I can't see it on these ones. Might be worth to check it with Wavin technical team. Actuators are only pushing the pin valves up and down so...
  18. U

    UFH or CH

    Good morning Bushman, manifolds are also being used for radiators, not just the UFH. If you are sure that you haven't got an water based UFH then I don't understand why gas engineers are telling you that you have. Hope that helps.
  19. U

    Replacement Parts for Wirsbo (Uponor) 1 1/4" UFH Manifold

    Hi Fozzie, I'm glad you've managed to get the Uponor part number. I've never had one. I've checked the catalogue from the link you've sent me and it looks like a right product but you won't find out till you have one in front of you. Have you ordered any? Mytub.co.uk is showing the stock...
  20. U

    Replacement Parts for Wirsbo (Uponor) 1 1/4" UFH Manifold

    Hi Fozzie, You could try try to clean and grease them (as Chalked advised). The good sign is - they are not leaking. We sell the pin valves for similar WGF manifold which is similar but not the same and pin valves are different. We've had a customer years ago (old enginner) who ordered the...

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Featured Content

Back
Top