My mate has a 16+year old ariston which isnt producing heating or hot water. I called around lastnight and gave it a service, hasnt been done in years, burner etc was very dusty. Anyway when i left every thing was fine, 11.2mb pressure on high and 2.5mb low kicking in and out on...
I have an Ariston MicroGenus 23 boiler and it seems to be misbehaving ever so slighly. The couple of symptoms are:
- Boiler fires up every 15-30 mins for 20 seconds or so and then the you can hear the pump moving water almost.
- The first 2 orange temperature lights appear to be sometimes...
Hi everyone just a quick question the boileris only 7 months old but the Mrs wants to put it on a plan basically for piece of mind I know there are some boilers BG won’t cover as the last one we had they didn’t but it was a real bad un!! They are coming out for first inspect in a couple of weeks...
I just bought a new flat and I can't get the combi boiler to start up. It turns on, and although it is old I have no reason to believe it shouldn't work. I don't want to look like an idiot calling out a plumber for something stupid I don't understand, although I will do if that's what's needed...
Hi All,
I am thinking of installing one of these heaters.
The online instructions says that it can be installed without an expansion tank if it is 4.2m from a cold water tap.
I have a tap about 3.6m from a standard screw isolation valve. If I connect to the isolation valve the pipe work would...
Hi guys. I've got an Ariston Microgenus mffi 24 non condensing that keeps displaying the A01 fault. Press 're set and it resets fine, fires up ok but the ignition keeps clicking, then after a while it will knock off again. It's like the boiler isn't detecting a flame as in the ignition sequence...
Arisen are offering good warranties on there boilers but i have no experience with them or their customer service, just wondering if anyone has experience with arisen products & customer services in particular boilers & unvented cylinder?
views appreciated
Hi,
Went to look at an Ariston boiler which was cutting out only when hot water was drawn, heating didn't cause the code which is odd. Code relates to APS so I checked for blocked flue, restrictor in flue or recuperator, split tube, venturi blocked, fan fault etc and all were fine, I changed...
Some advice please
the boiler has had a new main and secondary heat exchanger and a diaphragm
but still won't maintain hot water temp
when the hot water is drawn the burner fires up and then quickly drops to low then back to high, no modulation in the burner
would this be gas valve or pcb...
Evening
I have a ariston microgenus 23 mffi which has a diverter leak by sensor and also below actuator motor and then also looks like slight trace of water behind pump housing but really had to see. I would be inclined to change the diverted as I don't want to return after repair. Has...
Any advice on e34 fault code on arriston micro genious.
Fan/a p s / restrictor but is there any other advice from past experiences on these boilers plz
Thanks in advance
Got a a97 fault code tried new PCB still the same tried new sensor still the same!!!!with or without a demand when I turn on the power to boiler within 5 seconds this code comes up. Had this a few times and has always been the PCB. Any help appreciated
Hi guys,
I got a boiler to fix (Have not been to see it yet) - customer reports it is showing an intermittent SP1 error code (Ignition attempt failed).
I fixed one of those a while ago with SP1 and 501 codes and it turned out to be a PCB.
What is your experience with those boilers? I am aware...
Hi,
I have been to a customer a couple times, Initially I noticed that it was giving random A01 codes (about every 2 hours), the other thing I noticed was that it was still sparking when lit so the symptoms added up to a rectification issue so I went back and changed the probe and lead but the...
Hi all, could anyone give me the pipework layout for an Ariston undersink electric water heater. Its the 3kw version as stocked by B&Q. it comes with a pressure relief valve and i do have an expansion vessel but im not sure if i need more valves to incorperate this in the system. any help or...
Anybody have any experience of fitting these units as these fittings seem to leak unless you use loads of ptfe on them to get a seal.
Anybody got any advice if they are needed? seen a couple just installed with flexes straight onto the top.
Fitting one in a church next week and dont want them...
Hi Plumber Folk
I've got an Ariston Micro Genus that's about 15 years old and has been faultless... until now!!
A few issues have occurred over the last month. Initially whilst having a shower the flames would cut out in the boiler for about 5 seconds and then kick back in. I like a really hot...