Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

basin

  1. S

    Macerator - for toilet, basin, sink and washing machine?

    Hi, does anybody know any specific models that can deal with the toilet, basin, sink and washing machine? I've read contrasting things online, so more confused than ever now.
  2. N

    Double basin connection in centre

    Hi I want to connect 2 vanity basins in the centre between both of them. I am thinking to put 2 45deg Y joins but it looks bad! Any help?
  3. J

    Vado Elements basin mixer with no grub screw

    HI there I have a 10 year old Vado elements 3 hole basin mixer with quarter turn taps. One of the taps is leaking, but there doesn't seem to be a way to remove it because there is no grub screw or other obvious method. The mixer is tiled into place...
  4. D

    Basin removed but I want to use the pipes….can this be done

    I had a basin removed and my builder capped the pipes and plastered them into the cavity wall. If I want to resurrect them can I do that to plumb a washing machine into a new ‘utility’ area next to the pipes? My assumption is there will be a cold water pipe, hot water pipe and a waste pipe in...
  5. F

    Dripping single lever basin tap only when shower mixer is turned off

    Hi everyone, I recently had a Hansgrohe wall mounted single lever basin tap and a Hansgrohe thermostatic concealed bath/shower valve installed (full bathroom renovation). The basin tap started dripping a few days after installation. But it stops dripping only when shower is turned on. Any...
  6. T

    Can I put wash hand basin and shower into soil pipe

    Moved to a new house and changing bathroom layout would it be ok to take shower and wash hand basin into soil pipe toilet moving to middle window sink to the right of middle window shower to the first window
  7. C

    Isolator valves on basin taps

    Hi I have always had a poor water delivery to my bathroom and en-suit basins. The cold is just about acceptable but the hot is pathetic coming from the tank on the same floor. Both rooms have isolator valves fitted in the correct direction and then to flexi tails that just reduce the flow...
  8. J

    32mm basin trap, but 40mm bath trap

    Hi all. I'm just curious...why do bath traps use 40mm connections and pipework and yet basin traps use 32mm? I have a very short length (1.25m) of 40mm pipe leading from the bath into the soil pipe. Half way along this run, I have a 40mm 't' connector, from which the pipework from the basin...
  9. J

    Basin - convert current (2) taps to a mixer

    Hi, I'm new here. I have a basin with two individual taps, I want to change it to a mixer - the taps measure (centre to centre) 200mm. I have looked high and low to no avail, any ideas where to get one from? I don't want to make more holes or get a new basin if I can avoid it, I just want to...
  10. A

    Help with connection for Grohe Basin Tap

    Purchased a Grohe Basin Tap with has 3/8" flexi tails., but i notice the flexi's have no internal washer. I have purchased 2 Compression 15mm x 3/8" tap connectors from screwfix.... Part No.: 6089R and will fit these into two 15mm isolating valves. The question i have is that will i need to...
  11. D

    Waste pipe connection from basin

    I have a bathroom basin that had a flexible waste pipe leading from the sink into a fixed waste water pipe. The Flexi-pipe had perished away and I can not find a replacement to fix onto the basin to the waste pipe. I have tried numerous flex pipes but none fit onto both.
Im probably being stupid...
    • DIYAlex
    • Thread
    • basin connection pipe waste waste pipe
    • Replies: 1
    • Forum: DIY Plumbing Advice
  12. P

    Wall hung basin pulling away from wall

    I went in to fit a small wall hung basin today and had a devil of a job trying to keep it tight to the wall along the top edge. I’ve done a couple of wall hung basins before but never had one where the fixing points were right at the bottom. It was supplied with 2 wall anchors which I installed...
  13. B

    Clogged bathroom hand basin

    ExPat Brit living in the Philippines. I have an American standard hand basin installed in the bathroom - Single cold feed, with a popup plug - Problem the first part of the P trap clogs with a black mass from time to time easily cleaned via the clean out port. - Question is, considering the only...
  14. O

    Basin tap 3 tap hole mixer

    Does anyone know where I can get one of these or even know what there called typed in every flexi tap connector I can think of but nothing’s like this mixer style
  15. S

    Can a tap standard wash basin tap turn itself on?

    Hi everyone - a mildly amusing situation! I am not plumber but have done few bits at home over the years. At the moment, myself with a few others are looking after a church that is being sold. The current bathroom set up is eighteen years old. In three sets of toilets there are a total of 4...
  16. O

    Brushed brass overflow system for basin without integrated overflow

    We bought a Calypso Brenta vanity unit with basin. The basin came without any waste, and with just a hole for the overflow (no integrated channel). We ordered a brushed brass pop up plug for it, to match the rest of the bathroom (including the basin tap). Now we're stuck as we're completely...
  17. R

    Help! Any ideas how to level this corner basin?

    Hello, I’ve fitted loads of wall hung basins in my time but this one is defeating me. Whatever I do the front of the basin is much lower than the back and I can’t get it level. It’s and Ideal Standard basin with a vanity unity that goes underneath so it needs to be level. I’ve tried corner...
  18. M

    Space saving basin trap

    I'm fitting a countertop basin and want to use the shallowest trap I can. I found a product called Uniwaste Waterless Trap which would be ideal...
  19. D

    Stone Basin Waste Issue

    We have bought a stone basin for the bathroom and also bought a standard mushroom unslotted basin waste. The problem that we have is the recess cut out for the waste flange in the basin is large (measuring 70mm diameter) and therefore the waste has a large gap around it. Easier to see in the...
  20. R

    Removing cloakroom basin waste - no backnut present ?

    Removing basin waste - no backnut present ? I want to replace both the tap and the waste in the cloakroom basin - the tap is showing corrosion though it still works fine. Waste is OK but needs to be changed to a click-clack type because new tap will not have the incorporated button/lever which...

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Featured Content

Back
Top