im looking to replace this burner but is this easily done with a new modern riello burner or would you recommend replace with like to like? I hate these shutter manual fan.. I would prefer to replace with the new riello burner if possible but the firebird boiler has a latch case that can't be...
Hi, whenever my Gloworm 18r is on even if I leave it on non-stop for 6 hours the flame symbol for the burner never switches off and the radiator icon never stops flashing implying the rads are calling for more heat, even though they're all red hot and have been for hours, is this a fault or just...
Got some quotes for a service, one person has said if I haven't had the burner seal replaced for past 5 years, it should be done (& service price goes up by £55).
Boiler installed in 2015 - never had the 'seal' replaced? Is it a necessary requirement just as a matter of course?
I am troubleshooting a gas hob where one burner is reluctant to light. When it is lit and I blow the flame out the FSD on that burner cuts off immediately, whereas the others take 5-10 seconds as normal. I have tested the thermoucouple for continuity and also some sort of mV output (when held...
Hi All...thx for the help in advance.
I have recently installed a wood burner with back boiler heating system. Set up with gravity rad and header tank in loft.
I have a recirculation pump installed that I have connected to the rad system that I turn on and off manually.
I wanted to know how...
I'm looking for some advice on a frustrating problem I'm having with my old Eurostar 50-60s oil boiler please? Although it's old, most parts needed to operate it are now new.
The symptoms indicated a broken/seized burner motor or oil pump. I wrongly assumed the motor so I ordered a new one only...
I have a customers trianco burner that starts from cold ok for a few minutes (say 3minutes) then locks out then will not stay on.
Boiler had not been serviced in a long time and oil filters were bunged up as was the nozzle.
I decided to service it with hopes it was simple starving of fuel from...
My Worcester greenstar compact burner green light is only firing up for 5 seconds then cutting out. Anyone got any ideas before I call an engineer out. Incase it’s something simple.
I have a Grant Vortex Blue 26kw external oil boiler, installed less than 12 months ago. It's had intermittent non-starting problems resulting in multiple warranty visits, part replacements and eventually burner replacement. The replaced burner I discovered was a 'yellow flame' one, apparently...
Hello!!
I’ve got an old heatslave 20/25 running on kerosene. Came up with a lockout today. Tested everything I could. Symptoms, blower not starting. But… The burner runs and the boiler works if I bypass the “back to mainboard” loop for the blower motor live. To be specific, pin 4 pink wire from...
Hello all
Our riello burner intermittently won’t ignite. However for some reason when you tap gently the oil pump it lights every time. Any help appreciated. Thank you
Gloworm FF50 both the reset and burner lights are flashing and just buzzing, not firing up. Currently no hot water or heating, everything was working ok earlier today, then just suddenly stopped.
I have just bought a Danesmoor greenstar12-18, fitted with Reillo RBD burner. Worcester notes should be used with C2 Kerosene, is it possible to run on 35 sec low sulphur diesel instead? Any advice is very much appreciated thank you.
My parents house has a wood burning stove that is also connected to the central heating ( they have radiators and used to have an old boiler which they took out and replaced with the wood burner ) so the wood burner can also heat water which can then be pumped round the rads and works fine when...
Hey guys,
I've searched the forum, but haven't found anything useful. I don't know the name of the thing I'm looking for, so I apologize in advance if this is something basic that I should have found in a search.
So basically, my electrician is an old fella who doesn't know much about heating...
Camray 5 (90A) (20 year old) oil boiler, had a noisy fan on the boiler so investigated, just a bit of dirt in the casing however, having removed the burner unit I replaced the Burner Nozzle no problem, old was very dirty and sooty. Found the boiler wouldn't fire up. SO rather than than mess...
Hello. I have a problem with the oil boiler. After the summer season, he doesn't want to work normally. It started with blasting electric fuses. After looking inside, I saw condensation. Then it stopped working with the lid closed at the front. When the lid was open it worked. And since...
I have a 499k rayburn with a balanced flue. When we turn the cooker side on it works for a while OK, it could be OK for a few weeks then it will blow out and the kitchen smells of kerosene. If we try and restart it it won't come back on for a while. But then we just press the restart button and...
Evening everyone
I’m not sure if this is the place to post but was hoping for some help
I’m looking to buy a log burner and have it plumbed into my central heating system to provide hot water to my house.
I have no idea what I’m doing so a asking for recommendations of someone that ca do it...