Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

burner

  1. A

    Control box 569 Riello Thermital Burner fails to fire

    Why does the Control Box 569 for riello thermital supereffe 25 not fire?
  2. M

    Confusion understanding Burner manual specifications (electrodes gaps)

    Hello I've recently come across a Sterling Bentone burner manual online which is for my 2001 burner and I intend to use it to check my electrode gaps. The manual illustrates this information however it states multiple measurements and has me a little confused. For gap between electrodes it...
  3. J

    Oil burner boiler riello burner rdb HELP

    Hello alll, I have a firebird combi oil burner with the riello burner rdb in. It was working perfect up untill yesterday where it's going straight into instant lockout and won't do anything. Not fuel related because I can see it squiring out. Any guesses to what it could be ? Thank you
  4. gavdtra

    Thermostat on burner low but temp indivator much higher

    This thermoastat is much higher than the dial says. Correct.me if I'm wring but that doesn't seem right... It's been like that for days so it's not like I've just turned it down...
  5. J

    Zone valves & burner light?

    Hi all, For my boiler worcester bosch greenstar 30Kw Ri Compact, I noticed that, within programmer set time, for heating, if the house temperature has reached set temperature say19°C, the zone valve for heating will close, the boiler's a burner light (green) will be off, and blue light is off...
  6. Lockiedox

    Rayburn twin burner not working

    Hi all, I have a rayburn twin burner and it ran out of fuel while the heating was on a few weeks ago. Refilled the fuel and attempted to bleed it (very little came out) but it keeps tripping and the reset button doesnt help. The cooker side of it is working. Anyone offer some advice on whats wrong?
  7. J

    Worcester grecnstar burner seal (servicing)

    Hi all, Just curious - how often do you all replace the burner seal on a Worcester Greenstar during servicing? Assuming all is well with combustion levels, pressure test, etc. (As without X-ray vision, one obviously can't see the state of it until you take it apart). Thanks everyone, Jennie
  8. J

    Oil Burner nozzle capacities

    What is the significance of the kg/hr stamped on danfoss nozzles, I have a 0.6 usgpm nozzle fitted in my 20/26kw Firebird SE boiler. 0.6 usgpm is 2.27LPH and my boiler output of 20kw at 84% efficiency reflects this more or less. 2.27 LPH = 1.79 kgs/hr (see table) at a kerosene SG of 0.79, there...
  9. S

    log Burner Heat exchange?

    Hi all. Does anyone know of a small water heat system that I can attach directly to the back of my log burner, in my living room, that can conduct the heat (by contact) of the log burner and flow the hot water to a panel radiator in another room (e.g. conservatory)? I only want a very simple...
  10. gavdownie

    Fumes and Water under burner

    So the building is filling up with fumes, there's water coming from beneath the burner and there's a 7mm hole in the flue. I'm thinking the flue might be blocked and that's is causing water vapour to condense and come out the bottoms of the burner...? And the hole in the flue needs fixed Any...
  11. gavdownie

    Oil burner too hot

    Eighty degrees is a winter setting to my mind. Am thinking I should turn this dial down to four or so as the building is roasting?
  12. P

    Hi guys I am in need of some help, I have a 24 year old Boulter 50/70 utility oil boiler (camray) with a Riello 40 burner.

    The boiler has just been serviced and lots of new parts fitted, On firing up all works fine for approx 15 seconds then the flame cuts out but the motor keeps running, after approx 10 seconds the flame fires up again for 15 seconds and the same thing happens. If I remove the front door/cover of...
  13. G

    Worcester combi 25Si burner light out

    Hi all. was wondering if anyone knew why my hot water is not working on Worcester Greenstar 25Si . sequence of events: I removed a radiator for decorating , shutting of valves etc then repressurised the boiler back up to 1.5. All seemed to be working . I turned off water overnight. Next day I...
  14. C

    Oil burner randomly turns on

    Hi my oil burner has started to turn on randomly. It doesn't heat anything but I can hear it running outside. What could be causing this.? The timer is set to off
  15. B

    Hello. I worked on an oil boiler that when the outside door is closed the burner goes to lockout. When it is opened slightly it works perfectly. Ha

    Hello. I worked on an oil boiler that when the outside door is closed the burner goes to lockout. When it is opened slightly it works perfectly. Has been working fine in same situation for 20 years. I replaced the gasket at the burner and replaced the fire board on heat exchanger access door...
  16. F

    240v to burner...no igntion

    At a warmflow bluebird today not firing.I checked there was 240v going into the rdb control which there was so immediately got a control from the van but no dice same issue.So im getting 240v on my meter but no lockout light .Nothing completely dead.I plugged a mains powered grinder into the...
  17. M

    Glow Worm burner cycling on Pmax when trying to gas rate

    Hi I am gas safe registered, when commissioning glow worm Ultimate 3. Have put into p.01 to gas rate and set at Pmax, but burner keeps cycling on and off rather than running at full rate, so am getting incorrect gas rate, any thoughts?
  18. O

    Oil burner locking out

    Hi All, I recently ran out of heating oil and consequently the Riello burner locked out. Once I was refuelled I bled the oil supply to the burner and after several attempts to reset, it kicked in, albeit with a whirring noise on startup. It has run for 3 days and I had noticed the whirring noise...
  19. H

    Riello Burner Replacement Model No. & Reillo Fitter (London Area)

    Looking to replace our RIELLO 40 FS10 (3758435) Gas burner - 0.13kW, FAM.OIK.2 =12 -100mbar (42-116kW) but can no longer see the availability of this particular burner. Looks like it has a newer model that may have superseded it. Am I right in saying the replacement would be the RIELLO 40 GS10...
  20. R

    Does my gas cooker burner need replacing

    Hi, I have 15 year old Cannon Caniston gas cooker and when I turn the tap for the biggest burner full on it burns as if it was only half on, this has happened over time. I have checked the flexible hose is not kinked and the gas at the main is fully on, the other burners seem to be ok. I cleaned...

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Featured Content

Back
Top