Hi All
I have a 2"steel gas pipe that passes through a single skin wall, unsleeved. I don't want to turn the gas off and need some sort of split sleeve that can connect around the pipe and slide it into the penetration.(no jokes please :uhoh2:)
How's everyone's product knowledge? I've...
So I'm a self employed domestic plumber that specialises in bathrooms. I have a friend who owns a small office block in London. He has two toilets in this office block and wants them to be completely changed. Other than the fact my public liability insurance probably doesn't cover it. Would I be...
Afternoon all
I need a little help from a commercial gas engineer please.
to cut a long story short
I'm not commercial gas safe, but have the opportunity for quite a bit of commercial gas work via a close friend. But before I start spending big ££££ on the course I could do with a little chat...
Public Ladies toilets having a problem with flow of water to washbasins. The taps are infrared with a solenoid, every morning when taps are tried there is only a trickle and its pulsing, after a few minutes they start to splutter and air is ejected and then a good flow of water. If left for half...
Hi there,
I am looking to start liaising with a plumber that is able to make a few changes to a commercial unit I'm about to sign a lease on.
We will be needing water supply and drainage for both a sink and a commercial coffee machine on the ground floor. In the basement we will need two wall...
Hi all,
Just a quick question which has probably been asked before. Can you use commercial gas pipe sizing chart for domestic pipe sizing.
Cheers
Spanner
Hi hope someone can help me with this please nothing is happening on boiler changed both pcbs overheat thermostat & potentionometer & sensor still nothing thought pcb might be faulty so fitted another 1 still nothing but it's calling for heat ? Any ideas please thanks
Hi guys
Just wondered if any of you with catering can tell me what your views on this are.
Been asked to do a gas saftey check on a kitchen that I know does not have an Emergency Isolation Valve on the pipework entering the catering area. There is a working gas interlock, complete with an...
I'm entering into a realm of plumbing I have never experienced before and need a little help!!!
im installing a worcester bosch gb162-50kw, I have the worcester bosch pump set that comes with it as well. The existing heating system is in 35mm copper and is fully pumped gravity fed. The customer...
Hi lads, I know this is a long shot but do you know where ye might pick up some Pegler rad valve on/off caps. Have tried suppliers here in Dublin but with no luck.
its coming up to re up time and just wanted your opinion guys anything else to add
already have (ng and lpg)
CODNCO1
ICPN1
TPCP1
TPCP1a
ICPN1
CMET2
CIGA1
CDGA1
CORT1
many thanks
shaun
Currently only work on domestic.
Got a job replacing light commercial boiler in domestic premises.
Though it would be good to get my commercial ticket so I can do the work.
Questions:
I'm paying £760 for ;
CODCN01
CIGA1
lCPN1
TPCP1A
is this a good price? It's in London.
Also, how much...
What is the longest length of hot water pipe feeding a tap allowed with out a secondary return,saw a guideline of achieving 50c within 30 secs,this was only a guide not mandatory..cannot access PDF ,bug on pc..
Had a call today regarding an ideal imax 45
Obviously from the ideal commercial line of boilers at least in terms of build quality and durability
Right next to u16 meter. No other gas appliances at all
In small offices.
Now boiler is 45kw
Quick calculation of IV of meter and pipework is still...
Im just in the process of fitting a new heating hot water system in an old pub that is being converted to a turkish restaurant and need a bit of advice on the magnetic filter. I normally fit MagnaClean in domestic properties and was going to fit a 2 inch commercial one here but as they are...
Looking to fit a Worcester GB162 300kW cascade (3x 100kW) and was wondering whether any of you recommend using the Worcester Low Loss Header or something else?
Personally think that it would be good to fit something with an automatic air vent and dirt discharge, but is that something you all...