Whilst investigating air in my hot water system / tapping noises from a radiator I noticed the return connection on the radiator isn’t fixed.Where the valve goes into the radiator just slides back and forth to the point I pulled it a bit far and water started coming out. Could this be the cause...
I am moving the position of a WC which connects to the roof vent pipe and discharge pipe.
To do so I would like to rotate the soil pipe about 40 degree anti clockwise.
My question is: will the multi purpose boss connector the soil connects to rotate if I re position it?
Thank you once again.
Hi, I'm really needing some advice please.
I'm trying to connect an instant hot water tap, but haven't got as far as switching the tank on yet. There are 3 water pipes and a rubber tube coming from the tap, hot, cold and cold connection to the tank, then the rubber instant hot water pipe.
I...
Hi all,
The shop below my flat has recently had gas and an external box installed. Two days ago British Gas fitted a meter then yesterday workman started drilling into box and messing with piping. The box door was left open so I had a look and took these photos.
Obviously I'm concerned...
Purchased a new Frig at Best Buy. The installer came, and left everything b/c there wasn't a shut-off valve behind Refrigerator. There is a copper water line, which is about 9' which goes through a hole in floor, and connects to water through a small dedicated shut-off valve. He wouldn't let me...
Anyone know what you call this connection? It comes off lead pipe on to 22mm plastic pipe. It's got a slight leak I need to replace, any idea what size the lead pipe would be? 25mm?
Hello All,
Yes, another 'leaking cyclinder' question...I'd be grateful for your advice.
Vented 90x45 cyclinder in loft. Connection in question is not flow or return but an additional 5th connection that seems part of a separate system with dedicated hot water tank and shower pump. Can't get...
Hi
I need to connect a kitchen sink to a soil stack but the soil stack has an inspection hatch and what looks like a reducer into a clay pipe into the floor making it very difficult to fit a boss.
This should be pretty straightforward with a boss, but the level where the boss needs to fit is...
Afternoon,
I'm installing a water pump to pump river water to a garden, there is already a delivery hose installed with a solid 2" blue pipe next to the river, I can't work out what I need to buy to connect this to a 2" petrol driven water pump:
https://ibb.co/mzwFFSh
https://ibb.co/5LmVWy6...
Hi, Would anyone please be able to identify this older type of push-fit connector? The pipe is 15mm PX and I intend to carry out some modifications and replace with new 15mm JG Speedfit fittings. Are the older type fittings easily demountable?
Thanks in advance.
Parents have had a steel beam put into their hallway ceiling to adequately support landing and stairs.
This means that the waste from a sink and shower will need to be reinstated slightly lower into the soil pipe, as the pipes will now run under rather than through the beams (the joists will be...
Hi,
I bought a new sink and it has a 1/2" water inlet pipe but d previous pipework for the kitchen sink is very weird and to be honest I'm not sure exactly what connection I need or what what item I need for to make this work.
please could you help me understand what fitting I would need as I...
Hi,
I bought a new bath overflow and waste which I thought would be simple to install.
The existing seems to have been plumbed differently. Does any one know the connection I need in the second photo?
I had to cut the old overflow off as it wouldn't loosen.
I have a traditional British bathroom sink with 2 separate taps for cold and hot water. I need a bridge mixer tap for it. The problem is I only seem to find ones with 180mm tap connection centres, while mine needs 200mm. IS there hope?
Anyone know if there is a bottle trap connection tube minimum length?
(The pipe between the trap and the basin)
I would like mine as short as posible so the trap is less obvious.
Just wondered if I could cut it really short or does there have to be minimum drop distance before the trap for good...
Hello....it’s nice living in France...apart from the plumbing...I need to connect to the chopped pipe....the pipe in front will be removed...I think I can solder it...just...any hints or tips ?
I want to avoid concrete bashing...
Thanks
We have had what I have now discovered a dripping mains to cistern connection ( heavy dripping ) in up stairs bathroom ,only discovered when we observed stains on the ceiling in the room below the bathroom. Is it possible how this could manifest the problem or would it be likely I have a more...
Hi all,
Wish I had X-ray vision.
My customer has an old concealed shower valve, with a concealed shower hose connection.
There is a dribble from the plastic housing around the shower hose connection (it's not the rubber sealing washer/etc on the hose). So maybe a crossed thread on the hose...
Hello! Thanks so much for looking at my problem. I'm not a professional so I'd really appreciate any advice you can give.
My problem: I have a bathroom sink with a P trap that has an integrated flexible accordion-style section. Unsurprisingly, it leaks and stinks. It's also installed backwards...