Hi.
Looking to replace a 13-year old 824 with a new combi as its location is being moved, so seem like a good time to also replace. The new boiler needs to be more powerful - 30kW (as against 24kW?) - as the mains supply will also be upgraded.
The old 824 has actually had its pipes shifted to...
Hi All, I have a problem with my 10 year old EcoTec boiler. The pressure keeps rising to over 3 bar every few days. To get it running again I am releasing about a cupful of water from a radiator to get it below 3 bar. The filling loop is disconnected and I’ve noticed water from the pressure...
Got a replacement combination boiler, less that 1 year old.
Noticed some water from the connection pictured. Can't see what is it from the manuals, possibly a rainwater drain?
Was told by the person from Vaillant that it was an A A V (auto air vent), but she didn't sound too certain!
Can...
I recently had a new 2023 Vaillant ecoTec plus 630 (30kW) system boiler installed along with a Low Loss Header (LLH) in my house. I have 21 rads in the house and a room with UFH. The LLH was introduced as I was finding (before the LLH was fitted) that my old boiler (Vaillant heat-only boiler)...
Hi everyone,
Just wanted to share my experience with "upgrading" an S plan setup to Opentherm and Vaillant Control Center (VR66). There are a few threads on a few different forums but I wanted to share a full write-up with all the steps needed, benefits and costs.
Overall, I fully recommend...
British Gas servicing the above boiler ramped up the boiler to maximum in the installer menu to do flue gas analysis.
They also measured the working gas pressure on the gas valve test nipple. This fell to 8mbar on maximum and 17mbar on high setting.
They then removed the isolation valve under...
Hello,
I am looking for a heating engineer to diagnose and resolve an issue with my Vaillant EcoTec 832 combi boiler.
Job Location: Copeland Rd, London.
Job Description:
Problem: The boiler is not providing heating under normal conditions, although hot water supply is fine. Interestingly...
Hello everyone,
I'm facing an issue with my Vaillant EcoTec 832 boiler and would greatly appreciate your expert advice.
The Problem:
Heating Not Working Normally. When I turn on the heating, it doesn’t start. However, I still receive hot water, suggesting the boiler does work in some...
Hi everyone,
I’m writing on behalf of my elderly neighbour and hoping this is a problem someone on this
forum has experience of and remedied.
The boiler was not responding to the wireless thermostat. The various settings on the thermostat seemed fine and 3 heating times and temperatures were...
Please can anyone let me know if the NTC thermostats are on the correct way around??
I did have problems with the return pipe heating up before the flow so I'm thinking the last plumber may have swapped them around somehow.
Havin now reconfigure the central heating i've plumbed in all the...
I'm moving over to a sealed system on my EcoTec 38kw boiler. The old flow and return were in 28mm which was there long before the Vailant was installed.
I'm running 10 rads with a small UFH circuit and unvented cylinder.
Could i get away with replacing the 28mm to 22mm instead on the...
Hello everyone,
I have a Vaillant Ecotec Plus 838. The issue i have is after the heating is switched on and then left it to cool over night i see the pressure has gone up.
For example yesterday it was set at 1.3 heating was switched on and when it reached its temp it went upto 1.9 so no issues...
Hi,
I wonder if anyone can offer any advice/solutions...
I have a boiler, a Valient EcoTec 28 pro, which was fitted a year ago.
It makes a droning noise which resonates through the entire house. When it startes you hear this drone, which is loud enough to wake you if it kicks in during the...
What is the ideal pump size for Vaillant ecoTEC Plus 400 15kW Heat Only Boiler? The property is a studio with 1 large room, a small kitchen and a small bathroom.
I've been advised to use Grundfos UPS3 15-50/65-130.
Vaillant Ecotec Pro 24. Hi all, we are having issues with hot water as it only stays hot for a few minutes for the taps and shower. You can visibly see the temp on the boiler drop from about 67 for 42 within a few minutes. We removed Mira thermostatic bar and the water remains hot but as soon...
ecotec pro 24, the display screen goes blank after about 10-15 seconds and boiler is completely dead. isolate it for a couple of mins and it comes back on and repeats.
dont do much on these, so is it the board, or will a dodgy component do this to the board?
Im thinking the fan, so pump runs...
So I'm looking to have this set up, I have three zones + DHW
2 of those zones are underfloor heating connected to heatmiser uh4 and then there is a radiator zone for upstairs
My question is, can hot water priority be set up when there are three seperate 2 way zone valves, one for the...